Download IBM FixPak 23 Special Edition
Please Read Before Downloading and Installing IBM FixPak 23 "Special Edition"
IBM FixPak 23 Special Edition (only available on this Web site, not available from IBM and not the same as the standard edition of FixPak 23) is being provided for OS/2 Warp V3 users who desire to download and install the Word Pro 96 or Freelance Graphics 96 Pre-Release for OS/2 Warp on OS/2 Warp V3. No warranty or support is provided. Do not install this FixPak on OS/2 Warp V4 (code-named Merlin). This FixPak will only install on an English Language edition of OS/2 Warp. An updated FixPak for OS/2 Warp V3 which will install on national language editions of OS/2 Warp V3 will be available at the time Word Pro 96 and Freelance Graphics 96 for OS/2 Warp ship.
All users are cautioned to download and review the FixPak 23 Release Notes (which contain installation instructions and information on possible problems) before installing FixPak 23 "Special Edition." IBM ThinkPad and Aptiva system owners must also review Important Information for IBM ThinkPad and Aptiva Owners before installing the FixPak on network-connected systems.
Disk Space Requirements for Download and Expansion of FixPak 23 Files
You must have sufficient disk local or network-attached hard disk space available (approximately 34 Mb if you download, extract, and delete each compressed file one at a time) to download and expand each of the five compressed FixPak files to create the FixPak installation program. NOTE: You may download and expand each file onto a network attached hard drive and install the FixPak on your local OS/2 Warp V3 system directly from the network drive. Additionally, you must have approximately 23 Mb of disk space available on your local OS/2 Warp V3 boot drive to install FixPak 23 (or approx. 18 Mb if you have installed a previous FixPak).
If you have the required amount of hard disk space available, download each of the five compressed files to the SAME hard drive and subdirectory and issue the command FIXPAKn -D (where "n" is the file number) to expand each file and create the required FIXPAK subdirectory structure. If you fail to use the -D parameter while expanding each of the five files the FixPak will not properly install.
Self-extracting ZIP files for FixPak 23 Special Edition
WARNING: To extract each file you MUST use the command FIXPAKn -D (where "n" is the file number) to expand each of the five files, creating a FIXPAK subdirectory from which you will install the FixPak. Once you have downloaded and extracted each file (using the -D parameter) you may delete the downloaded files, if necessary, to save disk space. See the FixPak 23 Release Notes (FIXPAK23.TXT file) for installation instructions. After you have installed the FixPak and rebooted your OS/2 system, use the DRIVES facility of OS/2 Warp V3 to delete the FIXPAK subdirectory into which you extracted these files.
FixPak 23 Self-Extracting Zip Files (Extract Using FIXPAKn -D)
- FIXPAK1.EXE
|
Contact Us | Corporate | Developers | Downloads | Partners | Products | Purchasing | Services | Support |
|
Updated: 10/10/96 |
Freelance Graphics
Lotus Home