Installation of Warp fails with SYS3175 typically around diskette 1
Last Updated: 5th December, 1994
Symptoms
Warp installation fails on a SYS3175 (access violation exception),
typically (but not always) around Diskette 1.
Hardware
System board with external cache (e.g. most of today's 386, 486,
and Pentium system boards).
Problem
Some system boards' external cache logic have intermittent cache
coherency problems due to poor design. These tend to show up
sooner and more frequently under OS/2 because of its heavy use of
32-bit-wide RAM access.
Workaround
Turn off the external cache using the system board's CMOS Setup
program and restart the installation.
Notes
None.
This page is part of Frank McKenney's
Warp Installation Notes,
a major contribution to the
Warp Pharmacy
project.