USER MAY GET SYS3175 IN INSTALL.EXE WHILE INSTALLING WARP ON ZEOS PANTERA SYSTEM
Last updated: 11 Feb 1995
DESCRIPTION OF SYMPTOMS
User may get the following SYS3175 in Install.exe during OS/2
3.0 Installation on Zeos Pantera P90 System.
.
*************** SYS3175 32-bit***************
A program generated an acess violation at 0004d8a9
install.exe 0004:0000d8a9
P1=00000008 P2=000000a0 P3=xxxxxxxx P4=xxxxxxxx EAX=00000000
EBX=00000004 ECX=00000005 EDX=bed80127
ESI=00000d22 EDI=00005628
DS=008f DSACC=00f3 DSLIM=0000d12f
ES=0127 ESACC=00f3 ESLIM=00000d22
FS=150b FSACC=00f3 FSLIM=00000030
GS=0000 GSACC=**** GSLIM=********
CS:EIP=0027:0000d8a9 CSACC=00fb CSLIM=0000daa9
SS:EIP=008f:0000a7d2 SSACC=00f3 SSLIM=0000d12f
EBP=0000a7e8 FLG=00012246
*************** SYS3175 32-bit End ***********
SUMMARY OF RESOLUTION
Contact Zeos Technical Support for Bios Upgrade Information.
DETAILS OF RESOLUTION
If a system has a Flash Bios Version less than V9.0, user needs to
upgrade his Bios to 9.0 which can be downloaded from Zeos Bulletin
Board System at 612-362-1219. Once the bios is upgraded, the hard-
ware settings for IDE drive in CMOS should be configured as
following.
Multi Sector = Disable
Pre Set = Disable
LBA = Enable
For more info, please contact Zeos Technical Support.
Source
ftp://software.watson.ibm.com/pub/os2/info/zeos90.txt
This page is part of the
Warp Pharmacy
- a project
dedicated to providing comprehensive support for OS/2 Warp
via the World Wide Web.