You can get serious problems when something goes wrong when you
update the BIOS. Please visit our BIOS
information page for safety instructions.
|
Filename |
Description |
Date |
Size |
B1S_b22e.zip |
WARNING!
This in an unofficial BETA BIOS for out of warranty mainboards!
Use at your own risk!
P6I440BX/B1S BrillianX IS BETA BIOS version 2.2e for SpeedEasy
and LogoEasy. AWDFLASH.EXE Version 7.95 included!
(support both PCB v1.0 and PCB v2.0 mainboards)
BIOS Modified:
1. Support 76.8GB HDD. (However that is strictly
capacity and it does not say anything about compatibilty with
ATA66 or ATA 100 type harddrives. Most ATA66 or ATA100 drives
should have no problem to also work on ATA33 (UDMA/33) IDE based
mainboard at ATA33. However some of them do require the use
of a so called 80-lead (ATA66/100) IDE cable. It looks like
a normal IDE cable but it has the words "SYSTEM", "MASTER" and
"SLAVE" printed on it near the connectors.)
2. Support Coppermine II core processor. (FC-PGA
only with a very good converter card that has its own voltage
regulator for adjustment of CPU core voltage! Should work but
it is outside the specifications so we cannot guarantee it!) |
11-Jan-2002 |
246.013 |
B1S_v21slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 2.1 for LogoEasy, SpeedEasy and SecurityEasy.
AWDFLASH.EXE Version 7.07 included!
(support both PCB v1.0 and PCB v2.0 mainboards)
(for BrillianX IS mainboard only, not for
BrillianX I and BrillianX 1S/2000 mainboards)
BIOS modification:
1. Support large HDD.
2. Support EDO DRAM.
3. Updated new micro-code.
4. Updated some DMI information.
5. Resolved the abnormal shut down's problem under Win98SE,
When set the "Wake On LAN" as enabled in CMOS. |
30-Nov-1999 |
244.899 |
B1S_v20slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 2.0 for LogoEasy, SpeedEasy and SecurityEasy.
AWDFLASH.EXE Version 7.07 included!
(support both PCB v1.0 and PCB v2.0 mainboards)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard)
BIOS modification:
1. Passed HCT8.0 test.
2. Updated SMBIOS to v2.3.
3. Updated QDM interface to v2.0.
4. Updated micro code to support P-III 600MHz CPU.
5. Resolved the resume by ring fail problem.
6. Resolved the boot from LAN fail problem.
7. Resolved the CPU speed display error. |
5-Aug-1999 |
243.839 |
B1S_v17slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 1.7 for LogoEasy, SpeedEasy and SecurityEasy.
AWDFLASH.EXE Version 7.07 included!
(support PCB v1.0 motherboards only)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard)
BIOS modification:
1. Resolved the Boot from LAN's problem. |
30-Jul-1999 |
238.410 |
B1S_v16slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 1.6 for LogoEasy, SpeedEasy and SecurityEasy.
FLASH.EXE Version 1.3 included!
(support PCB v1.0 motherboards only)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard)
BIOS modification:
1. Supports P-III 550 CPU.
2. Supports ATA66 HDD.
3. Modified the default value of "spread spectrum"
to "disabled".
4. Resolved the video off method to "DPMS".
5. Supports ZIP driver by jumper.
6. Changed the position of SpeedEasy and Chipset item in BIOS
setup.
7. Deleted the 5V item in system monitor.
8. Supports SST39020 flash ROM.
9. Added NCR400.BIN in system BIOS.
10. Resolved the CPU fan halt problem under ACPI.
11. Resolved the QDI logo display problem when booting. |
2-Jun-1999 |
247.323 |
B1S_v14slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 1.4 for LogoEasy, SpeedEasy and SecurityEasy.
FLASH.EXE Version 1.3 included!
(support PCB v1.0 motherboards only)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard)
BIOS modification:
1. Set the Hard Disk of Ultra DMA 66 Mode 4 as Mode 2. |
11-Apr-1999 |
227.024 |
B1S_v13slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 1.3 for LogoEasy, SpeedEasy and SecurityEasy.
QDIFLASH.EXE Version 1.2 included!
(support PCB v1.0 motherboards only)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard)
BIOS modification:
1. Resolved the CPU detected problem in SpeedEasy option of
Bios Setup.
2. Disable the "processor Number Feature" to support
P-III CPU in Bios Feature Setup. |
10-Feb-1999 |
225.693 |
B1S_v12.zip |
P6I440BX/B1S
BrillianX IS BIOS version 1.2 for LogoEasy, SpeedEasy and SecurityEasy.
QDIFLASH.EXE Version 1.2 included!
(support PCB v1.0 motherboards only)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard)
BIOS modification:
1. Resolved the FSB display error.
2. added some new CPU support:a) Celeron 366/400/433/466/500
MHz CPU.b) PII 500/600/650/700/750 MHz CPUc) PIII (Katmai)
CPU |
22-Jan-1999 |
226.298 |
B1S_v11slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 1.1 for LogoEasy, SpeedEasy and SecurityEasy.
QDIFLASH.EXE Version 1.2 included!
(support PCB v1.0 motherboards only)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard)
BIOS modification:
1. If the wrong SPD data has been detected, this Bios will
not use the wrong SPD data.
2. Support IrDA.
3. Display the Mendocino 333MHz CPU as "333A". |
9-Nov-1998 |
221.965 |
B1S_v10slr.zip |
P6I440BX/B1S
BrillianX IS BIOS version 1.0 for LogoEasy, SpeedEasy and SecurityEasy.
QDIFLASH.EXE Version 1.2 included!
(support PCB v1.0 motherboards only)
(for BrillianX IS motherboard only, not for
BrillianX I motherboard) |
11-Sep-1998 |
221.363 |