Intakes | ||||
Drop-In Filters | ||||
Manufacturer | Product | Part # | Comments | MSRP* |
AFE | OE Replacement | 30-10061 | washable/reusable | $70.23 |
AFE | OE Replacement | 31-10061 | oil-free synthetic re-useable | $52.67 |
Blitz | OE Replacement | 59505 | cotton non-reuseable | $46.00 |
K&N | OE Replacement | 33-2170 | million mile warranty | $70.76 |
Tom's | Super Ram II | 17801-TSP20 | Foam re-useable | $89.00 |
TRD | High Air Flow | PTR05-53010-08 | washable/reusable oiled woven cotton | $84.00 |
Upgraded Intake Pipe | ||||
Joe-Z | Gen II Intake Pipe | PM Joe-Z | better flowing intake pipe, retains stock airbox | $99.00 |
Intake Systems | ||||
AEM | Short Ram | 22-464(B/R/P) | Blue or Red powder coat or Polished, CARB legal | $190.56 |
Fujita | F5 Intake | SR-2401 | polished short ram | $214.40 |
Injen | Short Ram | IS2094(BLK/P) | Black or Polished, now Gen III, Gen I&II caused CELs | $287.28 |
K&N | Typhoon | 69-8700TP | includes heatshield, CARB legal | $285.29 |
K&N | FIPK | 57-9018 | includes heatshield, CARB legal | $314.60 |
Mishimoto | CF Intake | MMCFI-IS300-01 | carbon/kevlar intake | $345.00 |
Rod Millen (RMM) | Short Ram | RMMIS011 | includes heatshield | $344.95 |
Swift Racing (SRT) | Short Ram | 3.5" pipe, 5" filter, R-ECU A/F tuning box req. soldering | $599.95 | |
Exhausts | ||||
Headers | ||||
Alphaworks | Same as Toyomoto Gen II? | $150.00 | ||
Mazzuri Super | Header and Y system | MZIS300SRSYH | includes Y pipe, 304 SS equal length, no cats | $600.00 |
Mazzuri Super | Supercharger Header | IS300SCHY | includes Y/downpipe, 6 to 1 merge, mandrel bent, equal length, stainless steel | $900.00 |
Megan Racing | Exact copy of Toyomoto Gen 1.5? | $150.00 | ||
OBX | Short Runner | 10-1901-3 | Same as Turboeast, short runner design | $150.00 |
OBX | Long Runner | Same as Toyomoto, long runners (not on OBX site?) | $150.00 | |
Pro-1 | Same as Toyomoto? | $150.00 | ||
Toyomoto | now Gen II, same as previous but thicker polished SS | $150.00 | ||
Y-Pipes | ||||
Alphaworks | Same as Toyomoto Gen II? | $150.00 | ||
Carson Tuned | 2 resonators, very different design, SS | $429.00 | ||
Mazzuri Super | Header and Y system | MZIS300SRSYH | comes with Mazzuri Header, no cats, no resonators | $600.00 |
Mazzuri Super | Supercharger Header | IS300SCHY | includes Y/downpipe, 6 to 1 merge, mandrel bent, equal length, stainless steel | $150.00 |
Megan Racing | MR-SSDP-LIS300 | Same as Toyomota Gen1, SUS-304 stainless | $139.95 | |
OBX | 12-1901-2 | Same as Turboeast, resonator, no cats | $150.00 | |
Pro-1 | Same as Toyomoto Gen I | $150.00 | ||
Toyomoto | now Gen II, same as previous but thicker polished SS | $150.00 | ||
Cat-Back Systems | ||||
5Zigen | ProRacer A-Spec | 70mm SS pipe, 100mm Inconel 600 tip | $750.00 | |
5Zigen | ProRacer ZZ | 70mm pipe, 100mm tip, full SS | $750.00 | |
Apexi | GT Spec | 172-KT05 | 60-65mm pipe, 115mm straight tip, round can, full SS | $675.00 |
Apexi | N1 | 162-KT05 | 60.5-65mm pipe, 115mm angle tip, round can, full SS | $569.99 |
Apexi | World Series | 116-KT05 | 60mm mild steel pipe, 100mm tip, oval SS can | $440.00 |
Greddy | EVO 2 | 10116670 | ????Greddy lists no details | $499.37 |
Greddy | SP2 | 10117000 | ????Greddy lists no details | $599.00 |
Greddy | Ti-C | 10117900 | ????Greddy lists no details | $520.00 |
Invidia | Cat-Back | HS00TI1GTP | ????Invidia lists no details | $699.00 |
Megan Racing | NA Spec | CBS-LI01 | 2.5" pipe, 4.5" tip, round can, full SS, removable silencer | $349.95 |
Skunk2 | MegaPower | 413-08-2255 | 110mm tip, T304 stainless, N1 style, CNC mandrel bent | $565.25 |
Tanabe | Medallion Touring | T70038 | 60mm pipe, 100mm double wall angle cut tip, <93db | $640.00 |
Tanabe | Concept G | T80038 | 60mm pipe, 100mm tip, round can, <93db | $600.00 |
Tanabe | Ultra Medallion | T60038 | 60mm pipe, 100mm tip, round can, Titanium, <95db | $860.00 |
Tanabe | Super Medallion Hyper | T4038Z | 60mm pipe, 100mm straight tip, oval can, <95db | $550.00 |
Axle-Back Systems | ||||
Blitz | Nur Spec S | MT4070 | ????Blitz lists no details | $396.00 |
Carson Tuned | rolled edge tip, oval can | $469.00 | ||
Fujitsubo | Legalis R | 760-23811 | 60.5mm pipe, round or oval can | $680.00 |
Fujitsubo | Super Ti | 460-23811 | 60.5mm pipe, oval can, Titanium | $1,515.00 |
HKS | Hi-Power | 3203-EX020 | 60mm pipe, 115mm tip, round can, full SS | $395.00 |
HKS | Dragger II | 3302-EX077 | 60mm pipe, 120mm tip, round slimline can, full SS | $375.00 |
HKS | Carbon-Ti | 3207-EX002 | 60mm SS pipe, 115mm Ti tip, graphite wrapped SS can | $575.00 |
JIC Magic | Spartan 505S ST | JCE10D2-ST | 60mm SS pipe, 100mm tip, titanium round can | $977.50 |
JIC Magic | Spartan 505S SUS | JCE10D2-SU | 60mm SS pipe, 100mm tip, SS can | $508.30 |
JIC Magic | Spartan DE Type 1 Ti | JCE10505-TI | 60mm pipe, 100mm angle tip, round can, full titanium | $1,298.00 |
JIC Magic | Spartan DE Type 1 SuS | JCE10505-SU | 60mm pipe, 100mm straight/angle tip, round can full SS | $638.00 |
Megan Racing | Axle Back | Mr-ABE-LI01 | 60mm pipe, 4" tip, oval can, T-304 Stainless | $245.00 |
Rod Millen (RMM) | High Flow Exhaust | 101.6mm SS tip rounded tip, oval can | $623.95 | |
TTE | Sports Silencer | AM 27625 | rolled edge 102mm tip, polished SS (muffler and tip only?) | $399.00 |
Engine Internals | ||||
Connecting Rods | ||||
Brian Crower | Pro Series | BC625+ | stock dimensions for 2JZ engines | $950.00 |
Carrillo | Pro-H | TO-2JZ>-65590S | Carr bolts, straight blade, 600g total, 428g rotate, 172g reciprocate | $1,800.00 |
Carrillo | Pro-H | TO-2JZ>-65590H | H-11 tool steel bolts, straight blade, 595g total, 423g rotate, 172g reciprocate | $1,800.00 |
Carrillo | Pro-SA | TO-2JZ<SA-65590H | H-11 tool steel bolts, tapered blade, 569g total, 406g rotate, 163g reciprocate | $1,200.00 |
Carrillo | Pro-A | TO-2JZ-1<A-65590H | H-11 tool steel bolts, tapered blade, 524g total, 385g rotate, 139g reciprocate | $1,200.00 |
Eagle | ESP H-Beam | CRS5590T3D | stock dimensions for 2JZ engines | $600.00 |
Manley | Pro I Beam | 14402-6 | stock dimensions for 2JZ engines, 705g, 1000+ HP capable | $1,000.00 |
Pauter | 2JZ Rod | TOY-220-550-1420F | stock dimensions for 2JZ engines, 680g | $1,182.00 |
Scat | Forged H-Beam | 65590218 | 4340 forged steel, ARP 2000 cap screws | $347.59 |
Pistons | ||||
Arias Pistons | 2JZ +.020 | 3720200 | 3.406"/86.5mm +.020"/+0.5mm piston, 8.9:1 comp ratio w/GTE heads, dome top | $892.00 |
Arias Pistons | 2JZ +.040 | 3720210 | 3.425"/87mm +.040"/+1mm piston, 9.0:1 comp ratio w/GTE heads, dome top | $892.00 |
Brian Crower | 2JZ +.020 | 3.406"/86.5mm +.020"/+0.5mm piston, aluminum, 8.5:1 comp ratio | $840.00 | |
Brian Crower | 2JZ +.040 | 3.425"/87mm +.040"/+1mm piston, aluminum, 8.5:1 comp ratio | $840.00 | |
CP Pistons | 2JZ Standard | SC7459 | Standard 3.386"/86mm piston, aluminum, CNC machined and balanced | $1,225.00 |
CP Pistons | 2JZ +.020 | SC7460 | 3.406"/86.5mm +.020"/+0.5mm piston, aluminum, CNC machined and balanced | $1,225.00 |
CP Pistons | 2JZ +.040 | SC7461 | 3.425"/87mm +.040"/+1mm piston, aluminum, CNC machined and balanced | $1,225.00 |
JE Pistons | 2JZ +.020 | 252059 | 3.406"/86.5mm +.020"/+0.5mm piston, forged aluminum, 8.5:1 comp. ratio @040 | $720.00 |
JE Pistons | 2JZ +.040 | 252060 | 3.425"/87mm +.040"/+1mm piston, forged aluminum, 8.5:1 comp. ratio @040 | $720.00 |
Manley | Platinum Series | 609005C-6 | 3.406"/86.5mm +.020"/+0.5mm piston, wristpin and rings included | $740.00 |
Toda | 86mm High Power | 13010-2JZ-000 | standard 86mm piston, 11.0:1 comp. ratio | $1,520.00 |
Toda | 87mm High Power | 13020-2JZ-000 | +1mm oversized piston, 11.2:1 comp. ratio | $1,520.00 |
Crank Safts | ||||
Brian Crower | Lightweight Crank | BC5309LW | 94mm stroker crank, 4340 billet chromoly steel, lightweight | $3,977.00 |
Brian Crower | Crank Shaft | BC5309 | 94mm stroker crank, 4340 billet chromoly steel | $3,637.50 |
Bearings | ||||
Clevite 77 | H Series Performance | CB-1628H | TriArmor moly/graphite treatment | $24.90 |
Clevite 77 | H Series Performance | CB-1628HX | TriArmor moly/graphite treatment, extra oil clearance | $24.90 |
Clevite 77 | H Series Perf. -.25 | CB-1628H-.25mm | TriArmor moly/graphite treatment, .25mm undersized shaft diameter | $24.90 |
Cam Shafts -- NOTE: Stock Cam specs are 248/248 duration with 8.56/8.31mm of lift | ||||
Brian Crower | Stage 2 | BC0311 | 264/264 duration, 8.74/8.74 lift, intake and exhaust set | $599.00 |
Brian Crower | Stage 3 | BC0312 | 272/272 duration, 9.52/9.65 lift, intake and exhaust set | $599.00 |
Valves | ||||
Brian Crower | Standard Intake | BC3300 | stainless steel, CNC machined, swirl polished, dished head, standard size (33.6mm) | $232.50 |
Brian Crower | Standard Exhaust | BC3301 | stainless steel, CNC machined, swirl polished, dished head, standard size (29.0mm) | $232.50 |
Brian Crower | +1mm Intake | BC3302 | stainless steel, CNC machined, swirl polished, dished head, +1mm (34.6mm) | $232.50 |
Brian Crower | +1mm Exhaust | BC3303 | stainless steel, CNC machined, swirl polished, dished head, +1mm (30.0mm) | $232.50 |
Brian Crower | +.5mm Intake | BC3304 | stainless steel, CNC machined, swirl polished, dished head, +.5mm (34.1mm) | $232.50 |
Brian Crower | +.5mm Exhaust | BC3305 | stainless steel, CNC machined, swirl polished, dished head, +.5mm (29.5mm) | $232.50 |
Ferrea | Stock Super Alloy Exh. | F1499P | super alloy (nickel-based, heat treated for high strength and heat resistance) stock | $275.16 |
Ferrea | +1mm Super Alloy Exh. | F1497P | super alloy (nickel-based, heat treated for high strength and heat resistance) +1mm | $270.00 |
Ferrea | Stock Comp. Plus Int. | F1498P | stock size intake valve | $263.40 |
Ferrea | +1mm Comp. Plus Int. | F1496P | +1mm oversized intake valve | $263.40 |
Ferrea | +1mm Hollow Exh. | F1079P | super alloy, +1mm oversized exhaust, hollow stem | $608.00 |
Ferrea | +1mm Hollow Int. | F1078P | +1mm oversized intake, hollow stem | $444.00 |
Ferrea | Stock 6000 series Exh. | F6099P | stock size, exhaust, special alloy | $221.38 |
Ferrea | +1mm 6000 series Exh. | F6097P | +1mm, exhaust, special alloy | $221.38 |
Ferrea | Stock 6000 series Int. | F6098P | stock size, intake | $221.38 |
Ferrea | +1mm 6000 series Int. | F6096P | +1mm, intake | $221.38 |
Manley | Stock Race Series Exh. | 11123-12 | chrome stem, fully machined, swirl polished, dished head, standard size | $262.20 |
Manley | +1mm Race Series Exh. | 11124-12 | chrome stem, fully machined, swirl polished, dished head, +1mm oversize | $262.20 |
Manley | Stock Race Series Int. | 11125-12 | chrome stem, fully machined, swirl polished, dished head, Pro-Flow, standard size | $262.20 |
Manley | +1mm Race Series Int. | 11126-12 | chrome stem, fully machined, swirl polished, dished head, Pro-Flow, +1mm oversize | $262.20 |
Supertech | +.5mm Exhaust | TEVN-1015 | black nitride coated stainless steel, +.5mm oversize (sold individually, need 12) | $14.09 |
Supertech | +1mm Exhaust | TEVN-1016 | black nitride coated stainless steel, +1mm oversize (sold individually, need 12) | $14.09 |
Supertech | +1mm Inconel Exh. | TEVI-1016 | inconel 751 alloy, +1mm oversize (sold individually, need 12) | $21.76 |
Supertech | +.5mm Intake | TIVN-1015 | black nitride coated stainless steel, +.5mm oversize (sold individually, need 12) | $14.32 |
Supertech | +1mm Intake | TIVN-1016 | black nitride coated stainless steel, +1mm oversize (sold individually, need 12) | $14.32 |
Valve Springs | ||||
Brian Crower | Valve Springs | BC1300 | chrome silicone alloy, 80lb seat pressure, 158lb open pressure | $109.69 |
Ferrea | Dual Valve Springs | S10033 | chrome silicone alloy double spring, 65/165lb | $600.24 |
Ferrea | Dual Special Alloy | S10045 | special alloy double spring, 87/195lb | $600.24 |
Ferrea | Dual High Pressure | S10109 | PAC alloy high pressure double spring, 115/245lb | $871.20 |
Manley | Pro Series | 22130-24 | super clean alloy, 82/187lb | $207.00 |
Supertech | Valve Springs | SPR-TS1015 | super clean chrome silicon vanadium steel alloy, 91/224lb (need 24) | $8.94 |
Retainers | ||||
Ferrea | Pro CNC Titanium | E11011 | titanium, cnc machined, 6 degree for Ferrea S10033 | $408.24 |
Ferrea | Pro CNC Titanium | E11037 | titanium, cnc machined, 6 degree for Ferrea S10045 | $408.24 |
Ferrea | Pro CNC | E10020 | aluminum/magnesium, cnc machined, 6 degree for Ferrea S10033 | $408.24 |
Manley | Pro Series | 23130-24 | cnc machined, 6 degree | $360.00 |
Supertech | Titanium Retainer | RET-TS60-T1 | titanium, cnc machined (sold individually, need 24) | $11.49 |
Valve Seats | ||||
Ferrea | Spring locator | S1001 | cnc machined, required for S10033, S10045, or S10109 | $110.00 |
Ferrea | High Pres. Locator | S1060 | cnc machined, use with S1001 for high pressure with S10045 or S10109 springs | $110.00 |
Valve Locks | ||||
Ferrea | 6 Degree Lock | K10037 | 6 degree radial groove valve lock (sold individually, you need 24) | $4.68 |
Manley | Pro Series | 13014-8 | 6 degree, 1.3 grams/pair, sold as set of 8 (you need 4 sets) | $42.69 |
Valve Guides | ||||
Ferrea | Bronze Guide Exh. | VG1034 | manganese bronze standard size valve guide (use with VS1008 seal) | $98.40 |
Ferrea | Bronze Guide Exh. + | VG1037 | manganese bronze +.001 oversize valve guide (use with VS1008 seal) | $98.40 |
Ferrea | Bronze Guide Int. | VG1035 | manganese bronze standard size valve guide (use with VS1009 seal) | $98.40 |
Ferrea | Bronze Guide Int. + | VG1036 | manganese bronze +.001 oversize valve guide (use with VS1009 seal) | $98.40 |
Valve Seals | ||||
Ferrea | Exhaust Valve seal | VS1008 | viton rubber valve stem seal, high temperature (sold individually, need 12) | $1.52 |
Ferrea | Intake Valve seal | VS1009 | viton rubber valve stem seal (sold individually, need 12) | $1.52 |
Supertech | Exhaust Valve seal | VS-T6E | viton valve stem seal (sold individually, need 12) | $0.65 |
Supertech | Intake Valve seal | VS-T6I | polyacrylic valve stem seal (sold individually, need 12) | $0.44 |
Fasteners | ||||
ARP | Main Studs | 203-5405 | 8740 chrome moly steel, 200,000psi tested, rolled threads | $135.00 |
ARP | Head Studs | 203-4205 | 8740 chrome moly steel, 200,000psi tested, rolled threads, 12 point | $145.00 |
ARP | Head Studs U/C | 203-4702 | 8740 chrome moly steel, 200,000psi tested, rolled threads, undercut | $175.00 |
ARP | Pro Series Rod Bolt | 203-6005 | ARP2000 alloy, 220,000psi tested, rolled threads | $80.00 |
Electronics (Tuning) | ||||
Fuel Controllers | ||||
Apexi | SAFC NEO | 401-A917 | 16 point fuel correction, monitoring mode | $385.00 |
Power Enterprise | CAMCON-T | CC-111 | -10% to +20% 17 point 1k-9k A/F control, 15 point +/- 20% VVT-I control | $505.00 |
Fuel and Ignition Controllers | ||||
Greddy | E-Manage Ultimate | 15500501 | A/F control, ignition control, 2 switchable maps, datalogging, raise rev limit | $680.00 |
Greddy | E-Manage Blue | 15500500 | 16x16 A/F map, 16x16 ignition timing adjustment | $379.00 |
HKS | F-Con iS | 42011-AK003 | fuel and ignition timing control, closed-loop, improved CPU over SZ and S | $795.00 |
Engine Electronics | ||||
Ignition Solutions | Plasma BOOSTER | 100% spark amperage increase, 4x spark energy increase for initial spark | $219.50 | |
Grounding Kits | ||||
Buddy Club | Spec Racing Condenser | BC04-RSCON | grounding kit and voltage stabilizer kit | $158.00 |
Ground Fusion | IS300 Grounding Kit | 12 segmet 4ga wiring kit with gold connectors | $84.99 | |
Sun Auto | Hyper Ground Type M | 5 segment 99.99% pure copper wiring, multiple colors, opt. gold connectors | $188.00 | |
Teck | Grounding Kit | 8 segment 4ga wiring, crimped and wrapped connectors for improved electronics | $69.00 | |
Teck | Pro Grounding Kit | same as regular kit but connections are soldered as well | $89.00 | |
Miscellaneous Other Engine Parts | ||||
Exhaust Cam Gears | ||||
Fidanza | Adj. Cam Gear | 93066(4/6/9) | 5 bolt, silver, red, or blue | $99.00 |
HKS | Gen 2 Cam Gear | 22004-AT003 | 3 bolt, silver and purple, harder material to solve wear issues with 1st generation | $185.00 |
JUN | 2JZ-G(T)E Cam Gear | 1006M-T007 | apparently and modified stock cam gear? | $153.99 |
Titan Motorsports | 2JZ Cam Gears | TMS 2JZCG | 5 bolt, blue, red, black or clear coat | $155.00 |
Unorthodox Racing | Ultra T | 51201702 | 5 bolt, clear coat | $220.00 |
Pulleys and Pulley Sets | ||||
Fluidampr | Dampened Crank | 850802 | internally balanced dampened aftermarket crank pulley | $336.51 |
Titan Motorsports | Dampened Crank | dampened aftermarket crank pulley | $454.00 | |
Unorthodox Racing | Ultra S Crank Pulley | 21210702 | underdrive crank pulley **NOT RECOMMENDED, may cause engine failure | $205.91 |
Unorthodox Racing | Ultra SS | 41201702 | lightened underdrive pulley set | $480.49 |
Radiators | ||||
Koyo | V-Core Radiator | V2356 | polished aluminum construction, claimed 20-30% more cooling than stock | $372.00 |
Mishimoto | Performance Rad | MMRAD-IS300-01 | brazed aluminum | $272.00 |
Flywheels | ||||
Aasco | Aluminum Flywheel | 107427-11 | lightweight aluminum flywheel, 11lbs | $396.30 |
Fidanza | Aluminum Flywheel | 130301 TO23 | lighweight aluminum flywheel, 12lbs, replacable friction disk | $379.00 |
Clutchmasters | Aluminum Flywheel | FW-607-3AL | 6061 T6 aluminum, carbon steel friction surface, OEM steel ring gear, SFI cert. | $520.00 |
Unorthodox Racing | Ultra L Flywheel | 061213700 | 6061 T6 aluminum, ferritic nitrocarburized steel friction surface, 11lbs | $640.00 |
Clutches | ||||
ACT | HD Street Clutch | TS5-HDMM | 286lb-ft capacity, 32% pressure increase, sprung disk | $458.11 |
ACT | Xtreme Street Clutch | TS5-XTMM | 350lb-ft capacity, 62% pressure increase, sprung disk | $508.09 |
ACT | HD Solid 4 Puck | TS5-HDR4 | 366lb-ft capacity, 32% pressure increase, solid disk | $457.52 |
ACT | Xtreme Solid 4 Puck | TS5-XTR4 | 448lb-ft capacity, 62% pressure increase, solid disk | $507.50 |
ACT | HD Solid 6 Puck | TS5-HDR6 | 366lb-ft capacity, 32% pressure increase, solid disk | $489.96 |
ACT | Xtreme Solid 6 Puck | TS5-XTR6 | 448lb-ft capacity, 62% pressure increase, solid disk | $529.95 |
ACT | HD Sprung 4 Puck | TS5-HDG4 | 366lb-ft capacity, 32% pressure increase, sprung disk | $486.78 |
ACT | Xtreme Sprung 4 Puck | TS5-XTG4 | 448lb-ft capacity, 62% pressure increase, sprung disk | $536.76 |
ACT | HD Sprung 6 Puck | TS5-HDG6 | 366lb-ft capacity, 32% pressure increase, sprung disk | $508.62 |
ACT | Xtreme Sprung 6 Puck | TS5-XTG6 | 448lb-ft capacity, 62% pressure increase, sprung disk | $558.60 |
Exedy | OEM Replacement | KTY17 | OEM replacement complete clutch assy. incl. pressure plate, throw-out bearing | $271.86 |
Clutchmasters | FX100 Stage 1 | 16-083-HD00 | steel backed organic, 70% holding capacity increase, sprung disk | $375.00 |
Clutchmasters | FX200 Stage 2 | 16-083-HDKV | steel backed kevlar, 70% holding capacity increase, sprung disk | $525.00 |
Clutchmasters | FX300 Stage 3 | 16-083-HDTZ | steel backed kevlar, 110% holding capacity increase, sprung disk | $525.00 |
Clutchmasters | FX400 Stage 4 | 16-083-HDCB | 4 or 6 puck ceramic, 170%holding capacity increase, sprung | $525.00 |
Clutchmasters | FX500 Stage 5 | 16-083-HDB4 | sintered iron, 4 or 6 puck, 200-400% holding capacity increase, unsprung | $375.00 |
RPS Performance | Sport disk | SS-14522-ST | 300lb-ft torque capacity, 10% pedal pressure increase, unsprung disk | $459.27 |
RPS Performance | Sport puck | SS-14522-SP | 380lb-ft torque capacity, 10% pedal pressure increase, sprung 6 puck design | $508.26 |
RPS Performance | Max disk | MS-14522-ST | 480lb-ft torque capacity, 60% pedal pressure increase, unsprung disk | $581.74 |
RPS Performance | Max puck | MS-14522-SP | 550lb-ft torque capacity, 60% pedal pressure increase, sprung 6 puck design | $673.60 |
Spec | Stage 1 | ST851-2 | steel backed organic, 285lb-ft torque capacity, sprung disk | $369.00 |
Spec | Stage 2 | ST852-2 | steel backed kevlar, 315lb-ft torque capacity, sprung disk | $459.00 |
Spec | Stage 2+ | ST853H-2 | carbon-kevlar, 350lb-ft torque capacity, sprung disk | $499.00 |
Spec | Stage 3 | ST853-2 | semi-metallic, 369lb-ft torque capacity, 4 or 6 puck sprung design | $459.00 |
Spec | Stage 3+ | ST853F-2 | full-face carbon metallic, 475lb-ft torque capacity, sprung disk | $599.00 |
Spec | Stage 4 | ST854-2 | semi-metallic, 369lb-ft torque capacity, 3, 4, or 6 puck unsprung design | $459.00 |
Spec | Stage 5 | ST855-2 | rigid iron, 589lb-ft torque capacity, increased pressure, unsprung disk | $559.00 |
Unorthodox Racing | Kevlar Full Face | 71203610 | full-face kevlar, 30% holding capacity increase, sprung disk | $585.18 |
Unorthodox Racing | Kevlar Windowed | 71203611 | windowed kevlar, 45% holding capacity increase, sprung disk | $585.18 |
Unorthodox Racing | Ceramic Disk rigid | 71213602 | segmented ceramic, 80% holding capacity increase, unsprung disk | $691.77 |
Unorthodox Racing | Ceramic 4 puck rigid | 71213604 | ceramic, 80% holding capacity increase, 4 puck unsprung design | $446.61 |
Unorthodox Racing | Ceramic 6 puck rigid | 71213606 | ceramic, 80% holding capacity increase, 6 puck unsprung design | $478.59 |
Unorthodox Racing | Ceramic Disk sprung | 71213612 | segmented ceramic, 80% holding capacity increase, sprung disk | $734.41 |
Unorthodox Racing | Ceramic 4 puck sprung | 71213614 | ceramic, 80% holding capacity increase, 4 puck sprung design | $510.57 |
Unorthodox Racing | Ceramic 6 puck sprung | 71213616 | ceramic, 80% holding capacity increase, 6 puck sprung design | $542.54 |
Unorthodox Racing | Feramic 4 puck rigid | 071223604 | feramic, 110% holding capacity increase, 4 puck unsprung design | $553.20 |
Unorthodox Racing | Feramic 6 puck rigid | 071223606 | feramic, 110% holding capacity increase, 6 puck unsprung design | $638.49 |
Unorthodox Racing | Feramic 4 puck sprung | 071223614 | feramic, 110% holding capacity increase, 4 puck sprung design | $617.16 |
Unorthodox Racing | Feramic 6 puck sprung | 071223616 | feramic, 110% holding capacity increase, 6 puck sprung design | $702.43 |
Drive Shafts | ||||
Driveshaft Shop | Steel | T0SH14-S | steel 1 piece driveshaft, 2.75" diameter | $399.99 |
Driveshaft Shop | Aluminum | T0SH14 | aluminum 1 piece lightweight driveshaft, 3" diameter | $499.99 |
Limited Slip Differentials | ||||
Carbonetic | 1.5 way LSD | ACTRB10911 | 1.5 way limited slip differential, long life carbon friction material | $1,349.00 |
Carbonetic | 2 way LSD | ACTRA10911 | 2 way limited slip differential, long life carbon friction material | $1,349.00 |
Suspension | ||||
Springs -- NOTE: Stock Spring Rates are 245lbs front and 210lbs rear **rates in Kg/mm are converted and rounded | ||||
B&G | S2 Sport Springs | 46.1.005 | 1.4"/1.4" drop | $319.00 |
Dropzone | Lowering Springs | DZ6700 | 2"/2" drop | $134.00 |
Eibach | Pro-Kit | 8260.140 | 1"/1" drop | $220.00 |
Eibach | Sportline | 4.6082 | 1.4"/1.4" drop | $276.75 |
Espelir | Active Super Down | ESA038 | 1.4"/1.2" drop, ~314lb/~235lb** | $219.99 |
H&R | Sport Spring | 52435 | 1.4"/1.3" drop | $369.00 |
Hotchkis | Sport Coil Springs | 19410 | 1.5"/1" drop 265lb/186lb, variable rate, include bump stops | $214.95 |
Intrax | Lowering Springs | 75.1.080 | 1.3"/1.3" drop, progressive rate | $275.00 |
Megan Racing | Lowering Springs | MR-LS-LI01 | 2"/1.75-2" drop, 300lb/250lb | $119.95 |
RS*R | Down Springs | 1.4"/1.2" drop, 280lb/240lb** | $179.00 | |
Skunk2 | Lowering Springs | 519-08-2040 | 1.4"/1.3" drop, 379lb/265lb main rate, 225lb/194lb tender rate | $179.55 |
Sprint | Lowering Springs | 6800 | 2"/2" drop | $256.50 |
Susp. Techniques | SportTech Springs | 65832 | 1.4"/1.4" drop | $224.10 |
Swift | Sport Springs | 4T004 | .8"/.6" drop, 291lb/246lb | $299.95 |
Tanabe | Sustec DF210 | TDF038 | 2"/1.2" drop, ~291lb/~213lb** | $230.00 |
Tanabe | Sustec GF210 | TGF038 | 2"/1.5" drop, ~336lb/~258lb** | $250.00 |
Tanabe | Sustec NF210 | TNF038 | 1.5"/1" drop, ~291lb/~230lb** | $250.00 |
Tein | H.Tech | SKY94-BUB00 | .7"/1" drop, 257lb/201lb, progressive rate | $280.00 |
Tein | S.Tech | SKY94-AUB00 | 1.3"/1.6" drop, 274lb/212lb, progressive rate | $250.00 |
Tenzo-R | GF2 | TLS2099 | 2"/1.8" drop, progressive rate | $108.99 |
TRD Japan | Sportivo Spring Set | 48130-JE100 | .75" drop, 86N/mm front, 77N/mm rear | $374.00 |
TTE | Lowering Springs | TD380-28437-00 | 1.2" drop | $269.00 |
Adjustable Springs | ||||
Ground Control | Coilover Kit | 8060.01 | -.5" to -2.5" drop, for STOCK SHOCKS | $435.76 |
Ground Control | Coilover Kit | 8060.02 | -.5" to -2.5" drop, for KONI SHOCKS | $435.76 |
Ground Control | Coilover Kit | 8060.03 | -.5" to -2.5" drop, for BILSTEIN SHOCKS | $435.76 |
Skunk2 | Coilover kit | 517-08-2455 | adjustable drop | $278.00 |
Shocks | ||||
Bilstein | HD (Front) | F4-BE5-6048-HO | Heavy Duty replacement | $281.98 |
Bilstein | HD (Rear) | F4-BE5-6049-HO | Heavy Duty replacement | $281.98 |
Koni | Sport Yellow (Front) | 8041 1264Sport | externally adjustable (knob), spring perch can lower ~.78" | $331.98 |
Koni | Sport Yellow (Rear) | 8041 1265Sport | externally adjustable (knob), spring perch can lower ~.6" | $331.98 |
KYB | GR-2 (Front) | 341262 | OE replacement | $79.38 |
KYB | GR-2 (Rear) | 341263 | OE replacement | $73.87 |
Tokico | HP (Front) | HU3581 | non-adjustable | $289.00 |
Tokico | HP (Rear) | HU3582 | non-adjustable | incl. w/ f |
Tokico | Illumina (Front) | BU3581 | 5-way adjustable | $469.00 |
Tokico | Illumina (Rear) | BU3582 | 5-way adjustable | incl. w/ f |
TRD Japan | Sportivo Shock Set | 48030-JE100 | 1665/1438N front, 928/1461N rear | $570.00 |
Coil-overs | ||||
Apexi | N1 Damper ExV | 269AKT02 | 32 way ride quality adjustment | $2,499.00 |
Buddy Club | Racing Spec Damper | SXE10 | 672lb/560lb , height and 15 way adjustable | $1,780.00 |
C-One | Type-G Coilovers | 672lb/448lb** | $3,060.00 | |
Cusco | Zero-1 Rubber | 19560ECN | height adjustable, no dampening adjustment, rubber mount | $1,450.00 |
Cusco | Zero-1 Pillowball | 19560ECP | height adjustable, no dampening adjustment, pillowball mount | $1,450.00 |
Cusco | Zero-2E Rubber | 19560MCN | height adjustable, dampening adjustment (optionally via remote E-Con system) | $1,960.00 |
Cusco | Zero-2E Pillowball | 19560MCP | height adjustable, dampening adjustment (optionally via remote E-Con system) | $1,960.00 |
D2 Racing | RS Coilovers | D2-L01 | 36- way adjustable damper and rebound, adjustable height and preload | $1,375.00 |
Greddy | Type S Coilover | 14012201 | 560lb/504lb,** 32-way adjustble dampening, adjustable base and spring perches | $1,640.00 |
H&R | Street Performance | 52406 | -1" to -2.5" front, -1.2" to -2.5" rear drop | $1,469.99 |
HKS | Hipermax RS | 80040-XT002 | 560lb/504lb** | $1,895.00 |
JIC Magic | FLT-A2 (FLT-TAR) | SXE10FLTA2 | 787lb/564lb, -.5" to -2.5" drop front and rear, 15 way adjustable damper | $1,950.00 |
JIC Magic | FLT-A1 (FLT-FAS) | SXE10FLTA1 | 678lb/504lb, height adjustment, 10 way adjustable damper, pillowball upper | $1,460.00 |
JIC Magic | SF-1 | -.5" to -3" front and rear, fixed dampening, pillowball upper mount | $1,299.00 | |
JIC Magic | FLT-A2RS | height adjustable, 15 way dampening adjustment, pillowball uppers | $1,755.00 | |
Ksport | Kontrol Pro | CLX02-KP | 672lb/336lb, 36-way adjustable dampening | $1,250.00 |
Ksport | Version RR | CLX02-RR | Race Applications, "aggressive spring rate" 36-way adjustable, adjustable body | $1,550.00 |
Ksport | Rally Spec AR | CLX02-AR | Asphalt Rally applications, extended stroke, 36-way adjustable dampening | $1,550.00 |
KW | Coilover Variant 3 | 515lb/455lb, -1.2" to -2.3" front and rear, infinite rebound, 14-way compression | $1,915.99 | |
Megan Racing | LP Coilover | MR-CDK-LI01 | 560lb/448lb, adjustable ride height, 32 way adjustable, pillowball mounts | $1,050.00 |
Moton | Double Adjustable | M 519 000 | remote reservoir, 15-way adjustable each bump and rebound | $4,460.00 |
Moton | Triple Adjustable | M 519 001 | remote reservoir, 15-way rebound, high-speed bump, 6-way low speed bump | $6,159.00 |
Moton | 4-Way Adjustable | M 519 002 | rem. res. 15-way high speed rebound, bump, 6-way low bump, 10 low spd. rebound | $9,355.00 |
Stance | GR+ | ST-SXE10-GR | 672lb/560lb, 15 way adjustable damper | $1,156.00 |
Tanabe | Sustec Pro S-OC II | TSC038X | 560lb/448lb,** +.25" to -2.25" front, +.75" to -2.25" rear, competition spring | $850.00 |
Tanabe | Sustec Pro S-OC | TSC038 | 560lb/448lb,** +.25" to -2.25" front, +.75" to -2.25" rear, helper spring | $1,050.00 |
Tein | CST | GSY20-K1SS3 | 448lb/336lb, +1.4" to -2.1" front, +1" to -2.4" rear | $1,480.00 |
Tein | CS | DSY20-RUSS3 | 559lb/448lb, -.5" to -2.1" front, -1.1" to -3.3" rear, EDFC compatible, Rubber mt. | $1,500.00 |
Tein | Flex | DSY20-6USS1 | 559lb/448lb, 0 to -3.4" front, -.2" to -3.7" rear, EDFC compatible, Rigid mount | $1,560.00 |
Tein | SS | DSY94-KUSS2 | 671lb/559lb, -.2" to -2.4" front, -1.2" to -2.5" rear, EDFC compatible | $1,000.00 |
Tein | Basic | DSY94-LUSS2 | 671lb/559lb, -.2" to -2.4" front, -1.2" to -2.5" rear | $750.00 |
Tein | CST | GSY20-KUSS3 | 504lb/392lb, +.2" to -4.5" front, -.1" to -4.8" rear | $1,480.00 |
Toda | DA Coilover | 51520-XE1-000 | 672lb/504lb, adjustable body, 12 way adjustable dampening | $2,480.00 |
Tokico | HP Shock/Spring Set | HPK243 | combines HP shock with a Tokico spring | $419.00 |
Tokico | Illumina Shock/Spring | ILK244 | combines Illumina adjustable shock with a Tokico spring | $619.00 |
Toms Racing | Advox Sport | TJE15 | 319lb/207lb,** 0 to -2" front and rear | $3,300.00 |
Toms Racing | Advox | TJE10 | comfort series | $2,290.00 |
TRD Japan | SUSKIT for Circuit | 48000-SE100 | 117.6N/mm/98.0N/mm, 1.2" drop, 4 way dampening adjustment | $1,775.00 |
TTE | Suspension Kit | TD380-27706-00 | threaded height adjustment, approximately 2" drop | $1,599.00 |
Zeal | Function-Xs | 10ZS051XS | 784lb/560lb, 6-way adjustable dampening | $1,979.99 |
Zeal | Function-X | 10ZS050X3 | 896lb/672lb, 30-way adjustable dampening | $2,379.99 |
Zeal | Super Function | 60ZS051SF | 1120lb/1008lb, 6- or 30-way adjustable dampening | $2,729.99 |
Suspension Electronics | ||||
Cusco | E-Con | 00B60M0 | controller and motors for remote adjustment of Cusco Zero-2E coilovers | $460.00 |
Tein | EDFC Motors | EDK05-12120 | For CS/FLEX/HA/RA/SS | $150.00 |
Tein | EDFC Controller | EDK04-K4469 | Universal Electronic Dampening Force Control controller | $230.00 |
Air Suspension | ||||
Ksport | Basic Airtech System | CLX02-AB | 32-way adjustable, 5 gal tank, 200 psi compressor | $3,510.00 |
Ksport | Pro Airtech System | CLX02-AP | 36-way adjustable, 5 gal tank, 200 psi compressor, wireless remote | $4,320.00 |
Sway Bars | ||||
Cusco | Sway Bar Front | 175 311 A30 | 30mm, non-adjustable | $266.99 |
Cusco | Sway Bar Rear | 195 311 B | 16mm, non-adjustable | $167.99 |
Eibach | AR Single Front | 8260.310 | 28mm | $297.00 |
Eibach | AR Single Rear | 8260.312 | 17mm adjustable | $343.00 |
Hotchkis | Sport Sway Bars | 22410 | 32mm hollow, +56%/+61%F, 19mm chromoloy hollow, +144%/+227% rear | $393.95 |
L-Tuned | Red Sways | +27% stiffer, 3-way adjustable rear | $299.00 | |
Tanabe | Sustec Stabilizer Front | TSB038F | 30.4mm, non-adjustable, chromomoly | $195.00 |
Tanabe | Sustec Stabilizer Rear | TSB038R | 18mm, non-adjustable, chromomoly | $195.00 |
TRD | Yellow Sways | PTRO6-53031-01 | over 100% stiffer than stock, non-adjustable | $439.00 |
TRD Japan | Sportivo Sways | 48800-JE100 | 26mm front, 16mm rear | $740.00 |
TTE | Stabilizer Kit | 3 position adjustable rear, non-adjustable rear | $559.00 | |
Strut Tower Bars | ||||
Cusco | Type 40 Rear | 195526A | polished aluminum, 40mm round rear strut bar | $186.00 |
Cusco | Type 40D Front | 195570A | polished aluminum, 40mm "D" shaped front strut bar | $158.10 |
Cusco | Type ALC OS Front | 195535A | oval aluminum bar, blue graphite wrapped, front strut bar | $186.00 |
Cusco | Type CB Rear | 195551A | graphite, 40mm round rear strut bar | $232.50 |
Cusco | Type OS Front | 195540A | polished aluminum 40mm oval front strut bar | $156.24 |
Cusco | Type OS Rear | 195541A | polished aluminum 40mm oval rear strut bar | $156.24 |
Cusco | Type OS-T | 195544A | polished aluminum triangulated 40mm oval rear strut bar | $126.48 |
JIC Magic | Front Alum. STB | OAS-SXE10-F | polished aluminum oval strut tower bar, rigid mounts, Front | $168.00 |
JIC Magic | Front Graphite STB | OCS-SXE10-F | clear coated graphite oval strut tower bar, rigid mounts, Front | $298.00 |
Tanabe | Sustec Strut Tower R. | TTB038R | rear strut tower bar only, adjustable pre-load | $98.00 |
Tein | Performance Bar | PBY11-01000 | aluminum rear strut bar | $150.15 |
Toms Racing | Upper Perf. Rod | 53650-TSE10 | steel pipe | $125.00 |
TRD Japan | Rear Tower Bar | 53605-SE100 | steel | $210.00 |
Miscelaneous Other Suspension | ||||
C-One | Front Lower Brace | front lower frame brace, 3 point mount | $245.00 | |
C-One | Rear Lower Brace | rear lower frame brace, 4 point mount, 2 steel bars | $315.00 | |
Cusco | Rear Type 1 Bar | 195476A | rear lower frame brace, 2 point mount bar | $79.05 |
Cusco | Rear Type 2 Brace | 195478A | rear lower frame brace, 4 point mount | $232.50 |
Cusco | Front Type 2 Brace | 195477A | front lower frame brace, multi-point | $158.10 |
Cusco | Trunk Bar | 195490A | 40mm aluminum trunk brace | $79.05 |
Cusco | Adjustable A-Arms | 195474K | adjustable front upper control arms | $350.00 |
Fig's Props | Static MIG control arm | rear lower control arm, adjustable off car, MIG welded, allows camber adjustment | $350.00 | |
Fig's Props | Static TIG control arm | rear lower control arm, adjustable off car, TIG welded, allows camber adjustment | $475.00 | |
Fig's Props | OVAS MIG control arm | rear lower control arm, adjustable on car, MIG welded, allows camber adjustment | $450.00 | |
Fig's Props | OVAS TIG control arm | rear lower control arm, adjustable on car, TIG welded, allows camber adjustment | $575.00 | |
JIC Magic | Lower Arm Bar 1 | SXE10LAB2F | front lower brace, eliminates control arm flex, 3 point mount | $228.00 |
JIC Magic | Lower Arm Bar 2 | SXE10LAB2R | rear lower brace, eliminates control arm flex, 4 point mount | $188.00 |
Mazzuri Super | Lower Tie Bar Kit | MZIS300TIE | tie bar braces for the rear suspension, 3 bars | $65.00 |
Megan Racing | Front Camber Control | MR-6427 | Adjustable upper control arms to add NEGATIVE camber, Polyurethane bushings | $377.00 |
Megan Racing | Rear Toe Control | pillowball bearing, adjustable toe control link | $171.00 | |
Megan Racing | Rear Traction Bars | MR-6374 | turnbuckle-style adjustment on car, adjustable traction arms with hard bushings | $141.00 |
Prothane | Sway Bar Bushings F | 18-1119-BL | bushing for 27.2mm front sway bar | $8.37 |
Prothane | Sway Bar Bushings R | 18-1124-BL | bushing for 14mm rear sway bar | $8.37 |
Swift Racing (SRT) | Rear Subframe Brace | CNC 6061 billet Aluminum brace bars for the rear sub-fram, 2 bars | $80.00 | |
Swift Racing (SRT) | Subframe spacers | CNC 6061 subframe stiffening spacers | $200.00 | |
Tanabe | Sustec Brace Front | TUB038F | front under brace, 4 point mount | $198.00 |
Tanabe | Sustec Brace Rear | TUB038R | rear under brace, 4 point mount | $198.00 |
Toms Racing | Suspension member | 51401-TSE10 | front lower suspension member rod | $168.00 |
Toms Racing | Suspension member | 52295-TSE10 | rear lower suspension member rod | $56.00 |
Toms Racing | Suspension member | 52297-TSE10 | rear lower suspension brace, 4 point mount, steel | $330.00 |
Toms Racing | Suspension member | 51403-TSE10 | front lower suspension brace, 3 point mount, steel | $255.00 |
TRD Japan | Sports Link Set | 48700-SE100 | F/R Upper and lower control arms, toe links, stiffer bushings | $1,490.00 |
TRD Japan | Suspension member | 51403-SE100 | front lower brace, 3 point mount, steel | $260.00 |
TRD Japan | Suspension member | 52297-SE111 | rear lower brace, 4 point mount, steel | $360.00 |
Brakes | ||||
Big Brake Kits | ||||
AP Racing | 13" 4 Piston F | 30-4000 | 4 piston, drilled and slotted, 1 piece, SS lines, street and occasional track | $1,867.58 |
Brembo | 12.9" 4 Piston Front | 1A1.6008A | 4 piston, slotted or drilled, aluminum hat, SS lines | $2,491.99 |
Endless | 11.6" 4 Piston | 4 piston, slotted, 2pc. rotor, SS lines, AL hat, front kit | $2,540.00 | |
Endless | 11.6" 4 Piston 1pc | 4 piston, slotted, 1pc. rotor, SS lines, front kit | $2,640.00 | |
Endless | Big Brake Kits | 4 piston, uses stock (or stock sized) rotors, SS lines, front kit | $2,229.00 | |
Greddy | 13" Grex 6 Piston F | 15015601 | 6 piston, slotted, aluminum hat, Earl's SS lines | $2,417.35 |
Ksport | 13" Procomp Front | BKLX020-831SO | 8 piston, slotted, aluminum hat, SS lines | $1,867.35 |
Ksport | 13" Procomp Rear | BKLX020-633SO | 6 piston, slotted, aluminum hat, SS lines | $1,867.35 |
Ksport | 14" Procomp Front | BKLX020-841SO | 8 piston, slotted, aluminum hat, SS lines, 18" wheels req. | $1,867.35 |
Ksport | 14" Procomp Rear | BKLX020-643SO | 6 piston, slotted, aluminum hat, SS lines, 18" wheels req. | $1,867.35 |
Rotora | 13" 4 Piston F 1pc | RBK013.01 | 4 piston, slotted or drilled & slotted, 1pc. rotor, SS lines, AL hat, ceramic pads | $1,867.35 |
Rotora | 13" 4 Piston F 2pc | RBK013.02 | 4 piston, slotted or drilled & slotted, 2pc. rotor, SS lines, AL hat, ceramic pads | $1,867.35 |
Rotora | 13" 4 Piston R 2pc | RBK027.03 | 4 piston, slotted or drilled & slotted, 2pc. rotor, SS lines, AL hat, ceramic pads | $1,867.35 |
Rotora | 14" 6 Piston F 2pc | RBK013.03 | 6 piston, slotted or drilled & slotted, 2pc. rotor, SS lines, AL hat, ceramic pads | $1,867.35 |
Rotora | 14" 4 Piston R 2pc | RBK027.04 | 4 piston, slotted or drilled & slotted, 2pc. rotor, SS lines, AL hat, ceramic pads | $1,867.35 |
Stoptech | 14" Full Kit | 83.517.4747 | 4 piston, slotted or drilled, 2pc. rotor, SS lines, AL hat (cars lowered up to 2.5") | $5,295.00 |
Stoptech | 14" Front Kit | 83.517.4700 | 4 piston, slotted or drilled, 2pc. rotor, SS lines, AL hat (cars lowered up to 2.5") | $2,695.00 |
Stoptech | 13" Front Kit | 83.515.4600 | 4 piston, slotted or drilled, 2pc. rotor, SS lines, AL hat (cars lowered up to 1") | $2,195.00 |
Stoptech | 13" Front Kit | 83.517.4600 | 4 piston, slotted or drilled, 2pc. rotor, SS lines, AL hat (cars lowered up to 2.5") | $2,195.00 |
Project Mu | Forged 13.6" F | PST116F345 | 4 piston, forged aluminum, slotted, 2pc. rotor, SS lines, AL hat, 4 pads | $2,520.00 |
Project Mu | Forged 14" F | PST116F355 | 4 piston, forged aluminum, slotted, 2pc. rotor, SS lines, AL hat, 4 pads | $2,520.00 |
Project Mu | Billet 2 piston Rear | PCST236R2 | 2 piston, milled aluminum, slotted, 2pc. rotor, SS lines, AL hat | $1,548.00 |
WP Pro | 13.2" LP6 Front | 6 piston, slotted 2 pc. rotor, SS lines, AL hat (fits 17" wheels) | $2,145.00 | |
WP Pro | 14.2" LP6 Front | 6 piston, slotted 2pc. rotor, SS lines, AL hat (requires 18" wheels) | $2,475.00 | |
WP Pro | 13.2" S6 Rear | 6 piston, slotted 2pc. rotor, SS lines, AL hat (fits 17" wheels) | $2,145.00 | |
Fig's Props | Supra TT adapters | SUS 303 stainless adapters for Supra TT 4 piston front brakes | $90.00 | |
Replacement Rotors -- Fit STOCK calipers | ||||
Brembo | Front | 25603 | post 2/02 production date, 1 piece front rotor, sold PER ROTOR (you need 2) | $84.21 |
Brembo | Front | 25555 | through 1/02 production date, 1 piece front rotor, sold PER ROTOR (you need 2) | $56.11 |
Brembo | Rear | 25583 | 1 piece rear rotor, sold PER ROTOR (you need 2) | $49.16 |
Brembo | Front Sport Drilled | 35603 | post 2/02 production date, 1 piece drilled front rotor | $247.80 |
Brembo | Front Sport Drilled | 35555 | through 1/02 production date, 1 piece drilled front rotor | $212.81 |
Brembo | Rear Sport Drilled | 35583 | 1 piece drilled rear rotor | $248.42 |
Brembo | Front Sport Slotted | 45603 | post 2/02 production date, 1 piece slotted front rotor | $247.80 |
Brembo | Front Sport Slotted | 45555 | through 1/02 production date, 1 piece slotted front rotor | $212.81 |
Brembo | Rear Sport Slotted | 45583 | 1 piece slotted rear rotor | $248.42 |
DBA | 4000 Front Drill/Slot | 4748XS | 1 piece drilled and slotted front rotor | $198.85 |
DBA | 4000 Rear Drill/Slot | 4748XS | 1 piece drilled and slotted rear rotor | $180.42 |
DBA | 4000 RR Slotted | 4749SR | 1 piece slotted right rear | $160.05 |
DBA | 4000 RL Slotted | 4749SL | 1 piece slotted left rear | $160.05 |
DBA | 4000 FL Slotted | 4748SL | 1 piece slotted left front | $185.27 |
DBA | 4000 FR Slotted | 4748SR | 1 piece slotted right front | $185.27 |
DBA | Street Front Drill/Slot | 748X | 1 piece drilled and slotted front rotor | $149.38 |
DBA | Street Rear Drill/Slot | 749X | 1 piece drilled and slotted rear rotor | $139.68 |
DBA | Street FL Slotted | 748SL | 1 piece slotted left front | $149.38 |
DBA | Street FR Slotted | 748SR | 1 piece slotted right front | $149.38 |
DBA | Street RL Slotted | 749SL | 1 piece slotted left rear | $126.10 |
DBA | Street RR Slotted | 749SR | 1 piece slotted right rear | $126.10 |
EBC | 3GD Front | EBC-GD781 | 1 piece drilled and slotted, zinc plated, front pair | $182.95 |
EBC | USR Front | EBC-USR781 | 1 piece slotted, front pair | $158.95 |
Power Slot | Cryo FL | 716CSL | 1 piece slotted, front left, cryogenically treated | $160.12 |
Power Slot | Cryo FR | 716CSR | 1 piece slotted, front right, cryogenically treated | $160.12 |
Power Slot | Cryo RL | 739CSL | 1 piece slotted, rear left, cryogenically treated | $138.07 |
Power Slot | Cryo RR | 739CSR | 1 piece slotted rear right, cryogenically treated | $138.07 |
Power Slot | Slotted FL | 716PSL | 1 piece slotted front left | $127.09 |
Power Slot | Slotted FR | 716PSR | 1 piece slotted front right | $127.09 |
Power Slot | Slotted RL | 739PSL | 1 piece slotted rear left | $105.04 |
Power Slot | Slotted RR | 739PSR | 1 piece slotted rear right | $105.04 |
Power Slot | ProStop Drilled FR | 716DR | 1 piece drilled front right | $109.46 |
Power Slot | ProStop Drilled FL | 716DL | 1 piece drilled front left | $109.46 |
Pro Stop | Drilled FL | 716DL | 1 piece drilled front left, cadmium plated | $109.46 |
Pro Stop | Drilled FR | 716DR | 1 piece drilled front right, cadmium plated | $109.46 |
Project Mu | SCR Pure Plus Front | PUSPT101SD | 1 piece slotted and dimpled, front | $260.99 |
Project Mu | SCR Pure Plus Rear | PUSPT201SD | 1 piece slotted and dimpled, rear | $260.99 |
Project Mu | SCR Pro Front | PGPRT012SDa | 2 piece slotted and drilled, front, 2 piece, aluminum hat | $697.99 |
Project Mu | SCR Front | PSCRT012SD | 1 piece slotted, front | $418.99 |
RB Racing | 2-Piece Rotors Slotted | 2 piece floating design, 10% lighter than stock, slotted | $575.00 | |
RB Racing | 2-Pc Rotors C/D, S | 2 piece floating design, 10% lighter than stock, cross drilled and slotted | $605.00 | |
Rotora | Drilled and Slotted FL | R.44083.1C | 1 piece drilled and slotted front left rotor, black protective hub coating | $139.99 |
Rotora | Drilled and Slotted FR | R.44083.2C | 1 piece drilled and slotted front right rotor, black protective hub coating | $139.99 |
Rotora | Drilled and Slotted RL | R.44090.1C | 1 piece drilled and slotted rear left rotor, black protective hub coating | $121.99 |
Rotora | Drilled and Slotted RR | R.44090.2C | 1 piece drilled and slotted rear right rotor, black protective hub coating | $121.99 |
Rotora | Slotted FL | R.44083.1S | 1 piece slotted front left rotor, black protective hub coating | $121.99 |
Rotora | Slotted FR | R.44083.2S | 1 piece slotted front right rotor, black protective hub coating | $121.99 |
Rotora | Slotted RL | R.44090.1S | 1 piece slotted rear left rotor, black protective hub coating | $103.99 |
Rotora | Slotted RR | R.44090.2S | 1 piece slotted rear right rotor, black protective hub coating | $103.99 |
Rotora | OEM Front | R.44083 | OEM style blank rotors, front | $171.98 |
Rotora | OEM Rear | R.44090 | OEM style blank rotors, rear | $145.98 |
Stillen | Drilled Front | LEX1000 | 1 piece drilled front | $235.82 |
Stillen | Drilled Rear | LEX1001 | 1 piece drilled rear | $207.74 |
Stoptech | Sportstop FL Drilled | 128.44083L | 1 piece drilled front left rotor | $109.99 |
Stoptech | Sportstop FR Drilled | 128.44083R | 1 piece drilled front right rotor | $109.99 |
Stoptech | Sportstop RL Drilled | 128.44090L | 1 piece drilled rear left rotor | $99.99 |
Stoptech | Sportstop RR Drilled | 128.44090R | 1 piece drilled rear right rotor | $99.99 |
Stoptech | Sportstop FL Slotted | 126.44083SL | 1 piece slotted front left rotor | $109.99 |
Stoptech | Sportstop FR Slotted | 126.44083SR | 1 piece slotted front right rotor | $109.99 |
Stoptech | Sportstop RL Slotted | 126.44090SL | 1 piece slotted rear left rotor | $99.99 |
Stoptech | Sportstop RR Slotted | 126.44090SR | 1 piece slotted rear right rotor | $99.99 |
Brake Pads | ||||
Axxis | Deluxe Front Pads | 107.06190 | low dust, low noise, low rotor wear street pads | $74.99 |
Axxis | Deluxe Rear Pads | 107.07710 | low dust, low noise, low rotor wear street pads | $63.99 |
Axxis | Ultimate Front Pads | 109.06190 | medium to high dust, low noise, aggressive street or light race pads | $82.99 |
Axxis | Ultimate Rear Pads | 109.07710 | medium to high dust, low noise, aggressive street or light race pads | $76.99 |
EBC | Red 3000 Ceramic F | EBC-DP31223C | low dust ceramic pads | $95.95 |
EBC | Red 3000 Ceramic R | EBC-DP31224C | low dust ceramic pads | $77.95 |
EBC | Green 2000 Front | EBC-DP21223 | medium dust organic pads | $88.95 |
EBC | Green 2000 Rear | EBC-DP21224 | medium dust organic pads | $67.95 |
EBC | Yellow Front | EBC-DP41223R | high dust aggressive street/race pad | $105.95 |
EBC | Yellow Rear | EBC-DP41224R | high dust aggressive street/race pad | $81.95 |
EBC | Ultimax Front | EBC-UD619 | stock-like replacement pads | $53.95 |
EBC | Ultimax Rear | EBC-UD771 | stock-like replacement pads | $52.95 |
Endless | Super Street M R | low dust, low noise, long life | $237.50 | |
Endless | Super Street M R | low dust, low noise, long life | $228.00 | |
Endless | Super Street S F | low dust ceramic pad | $170.95 | |
Endless | Super Street S R | low dust ceramic pad | $170.95 | |
Endless | Super Sport Y F | high performance ceramic pad | $156.75 | |
Endless | Super Sport Y R | high performance ceramic pad | $156.75 | |
Endless | Vita Nuova F | stock-like replacement pads | $113.95 | |
Endless | Vita Nuova R | stock-like replacement pads | $113.95 | |
Hawk | HPS Front | HB375F.669 | low dust, low noise, low rotor wear street pads | $90.99 |
Hawk | HPS Rear | HB499F.610 | low dust, low noise, low rotor wear street pads | $55.99 |
Hawk | HPS Ceramic Rear | HB499Z.610 | performance ceramic rear pads | $69.24 |
Mintex | Xtreme High Perf. | D619MX | aggressive performance up to 700 degrees C, front only | $90.22 |
Porterfield | R4S Front | AP619 | low dust, low noise street pad | $118.39 |
Porterfield | R4S Rear | AP771 | low dust, low noise street pad | $78.91 |
Project Mu | B-Force Front | PBF123-b | low dust, low noise, low wear street pads, up to 400 degrees C | $109.99 |
Project Mu | B-Force Rear | PBR125-b | low dust, low noise, low wear street pads, up to 400 degrees C | $99.99 |
Project Mu | Titan Kai Front | PTF123b | titanium flouride and carbon, up to 800 degrees C | $189.99 |
Project Mu | Titan Kai Rear | PTR125b | titanium flouride and carbon, up to 800 degrees C | $179.99 |
Project Mu | NS Front | PSF123 | low dust, low noise, low wear street pads, up to 400 degrees C | $84.99 |
Project Mu | NS Rear | PSR125a | low dust, low noise, low wear street pads, up to 400 degrees C | $74.99 |
Rotora | H2 Ceramic Front | RP.06190.1 | street or light race ceramic pads | $82.99 |
Rotora | H2 Ceramic Rear | RP.07710.1 | street or light race ceramic pads | $76.99 |
Stillen | Metal Matrix Front | D619M | semi-metallic street pad | $71.50 |
Stillen | Metal Matrix Rear | D771M | semi-metallic street pad | $59.02 |
Stainless Steel Brake Lines | ||||
Goodridge | SS Brake Line | 21500 | stainless steel braided brake lines, lifetime warranty, pressure tested to 3000psi | $119.64 |
Project Mu | Teflon Brake Line | PBLT011 | teflon, triple layer construction | $274.99 |
Rotora | SS Brake Line Front | L.44077 | stainless steel braided front brake lines | $66.00 |
Rotora | SS Brake Line Rear | L.44396 | stainless steel braided rear brake lines | $69.52 |
Russell | SS Brake Line Kit | 688400 | stainless steel braided brake line kit | $136.95 |
Stoptech | SS Brake Line Front | 950.44000 | stainless steel braided front brake lines | $69.99 |
Stoptech | SS Brake Line Rear | 950.44500 | stainless steel braided rear brake lines | $69.99 |
*The MSRP data is |