Adaptec ® CI/O software
Remote management of SCSI devices made easy
HIGHLIGHTS
-
Monitors and manages all SCSI devices connected to Adaptec host adapters
-
Supports any network from a local server to a network of up to 100 servers
-
Allows remote management from any Windows client
-
Includes HP OpenView ® management software
OVERVIEW
Striving to keep users productive, network and system managers battle the growing complexity of the network environment. Most
management tools designed to make the job easier stop short of the I/O subsystem, where bottle-necks can slow the entire network.
Adaptec CI/O software fills the gap. With easy-to-use Adaptec CI/O software, managers can monitor all SCSI peripheral devices
connected to servers by Adaptec host adapters.
KEY BENEFITS
Remote management from a single desktop
Using Adaptec CI/O software on any Windows client, managers can remotely monitor the I/O performance of any server on the network
from a single, central location. Adaptec CI/O software maps the status and performance of all SCSI peripherals attached to any
network server with Adaptec host adapters. It polls SCSI busses and automatically notifies the manager of any changes in status,
such as additions to the I/O subsystem configuration or device failures.
Failure detection in an instant
With Adaptec CI/O software, managers can pinpoint I/O problems without leaving their desks. The software automatically detects
failure of any SCSI device on a network server and notifies the manager immediately.
Easy update of device drivers
Keeping SCSI device drivers consistent and up to date on every server in the network used to be a time-consuming and labor-intensive
challenge. Not any longer. Using the Adaptec CI/O software graphical interface, the manager simply highlights the target server on the
network map and logs on remotely. Then, a quick click of a button installs the latest drivers.
Performance profile at a glance
Adaptec CI/O software can display the performance profile of every SCSI device attached to network servers. In addition, managers can
view the profiles of several servers at once for rapid comparison.
Adaptec CI/O software gives managers the flexibility to tailor the profile for easy interpretation. Managers can choose the performance
parameters to display and set the sampling rate from 1 to 60 minutes. Then the data can be viewed in a choice of graph styles.
With a clear view of I/O traffic, managers can spot bottlenecks and act quickly to balance I/O loads to optimize performance among
SCSI devices.
Reaching every corner of the network
A truly scaleable enterprise I/O solution, Adaptec CI/O software improves the manageability of any size network-from a single server
to a global network of hundreds. Because it is based on the HP OpenView network management platform, Adaptec CI/O software can
integrate with other HP OpenView network management tools. As a result, the network managers can create a complete management
environment with a consistent and integrated interface.
TECHNICAL SPECIFICATIONS
- Versions
-
Adaptec CI/O software Single Server- Includes 100-node version of HP OpenView 7.2, Includes Sytron's Proserve CX Lite -
tape backup software for NetWare
Adaptec CI/O software Professional- Includes 100-node version of HP OpenView 7.2, Includes Sytron's Proserve CX Lite -
tape backup software for NetWare
- Host adapters supported
-
AHA ® -1540/52
AHA-2740/42
AHA-2840/42VL
AHA-2940
AHA-3940
AHA-3980/85
AIC-7770
AIC-7870
- Operating systems supported
-
- Client:
-
Windows 3.1 or later
- Server:
-
NetWare 3.12
NetWare 4.X
- Minimum system requirements
-
- Client:
-
486 PC system
8 MB RAM
5 MB disk space
640 x 480 VGA monitor
- Server:
-
386 or greater
8 MB RAM
3 MB disk space
One or more of the above Adaptec SCSI host adapters IPX network protocol
Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, California 95035
Adaptec Singapore
Block 1002
Jalan Bukit Merah
#07-18/20
Singapore 0315
Telephone: (65) 278-5213
FAX: (65) 273-0163
Adaptec Brussels
Dreve Richelle 161
Bldg. A, 2nd Floor
B1410 Waterloo
Belgium
Telephone: (32) 2-352-34-11
FAX: (32) 2-352-34-00
Literature: 800-934-2766
Ordering Software: 1-800-442-7274 (USA and Canada) or 408-957-7274
Interactive FAX: (408) 957-7150 (USA & Canada)
Adaptec USA Bulletin Board: (408) 945-7727 (up to 28,800 baud, using 8 bits, 1 stop bit, no parity)
CompuServe: Go Adaptec
Internet ftp server: ftp.adaptec.com
World-Wide Web: http://www.adaptec.com
Copyright (C) 1995 Adaptec, Inc. All rights reserved. Adaptec, the Adaptec logo, CI/O, IOware, the IOware logo, AIC-xxxx and AHA are
trademarks of Adaptec, Inc. which may be registered in some jurisdictions. HP OpenView is registered trademark of Hewlett Packard
Company used under license. Proserve CX Lite is a trademark of Rexon, Inc. used under license with Sytron Corporation. All other
trademarks used are owned by their respective owners.
Information supplied by Adaptec, Inc. is believed to be accurate and reliable at the time of printing, but Adaptec, Inc. assumes
no responsibility for any errors that may appear in this document. Adaptec, Inc. reserves the right, without notice, to make
changes in product design or specifications. Information is subject to change without notice.
PN: W980224-011 1/95
Return to CI/O overview page ||
Return to Server Management Software Solutions page
For comments and suggestions, please send e-mail to Adaptec's WebMaster