StepEasy
- As one of the Legend QDIs innovations, StepEasy is a
powerful and efficient Easy Technology for PC DIY fans. It
provides a friendly interface for you that you can adjust
the CPU frequency conveniently and directly. It is so powerful
that you can change the CPU frequency just in a few seconds
under the operating system and have no need to reset the PC
or change the jumpers. In addition, StepEasy can decrease
the risk of changing the CPU frequency to minimum. As long
as you conform to the steps of tuning the CPU frequency, there
is almost no risk to adjust the frequency.
Instruction:
Because there exist some risks for the CPU or
the motherboard when you change the CPU frequency, please
read the following and refer to the figure above carefully
before tuning the CPU frequency.
The select CPU frequency is shown in the LED window with three
colors: green digits indicate the frequency is entirely
safe, yellow digits indicate the frequency is relatively
safe, and red flashing digits indicate the frequency
is somehow dangerous that may lead the system down.
We recommend you not to select the Red Flashing Value
to run.
To avoid accident, we recommend you to save your program
before run StepEasy.
1. You can click on the 1MHz increase (decrease) or 10MHz
increase (decrease) button to set your wanted frequency, then
click on the GO button to get the select frequency.
2. Also, you can drag the slider to the wanted frequency,
then click on the GO button to get the select frequency.
3. You can click on the Default button, then click on the
GO button to get the default frequency.
4. StepEasy enables you to save the successful CPU tune frequency
for next use. If you want to save the current frequency, click
on the Save button to realize it.
5. When click on the Load button, the saved CPU frequency
is obtained immediately.
6. When click on the Min button, the utility will minimize
to an icon in the right-bottom task tray. Whenever click on
the QSE(QDI StepEasy ) icon in the task tray, the utility
will be activated in the current window.
SetpEasy function mode: detail
.
StepEasy
Press release, for more detail, click press
release
StepEasy
Manual - download .
Note:
1. QDI StepEasy can only support the QDI motherboard with
the clock chip that supports StepEasy.
2. The performence of StepEasy is related to the CPU, SDRAM,
peripheral equipments and the
software running.
3. There exist some risks to change the CPU frequency for
the CPU or motherboard. StepEasy
can decrease the risks to minimum. But Legend QDI will not
be responsible for any damages
caused.
System requirements:
Windows 95 OSR2 or later, Windows NT 4.0(workstation or
server)
At least 25M free hard disk
At least 16M memory(32M recommended)
|
|