(Page 1 of 10) 1 2 3 4 5 6 Next > Category: Intrusion Detection » Host Network Equipment Performance Monitor Added 2006-03-16 NEPM is a very general, highly configurable, two part software system that monitors any type of logged data from IP networked equipment and reports it via E-mail and web pages. Current conditions and history from systems based on Windows NT/2000 and UNIX can be tracked and reported. Most major server, switch and router systems can be monitored, without running agents on the target systems. Many networks behind separate firewalls can be reported on at one central site, and hard-to-reach isolated nets can be accessed. NEPM itself is system independent and can be hosted on either a UNIX or WinNT system or a combination of these with equal ease. NEPM monitors and reports uptime, critical events such as intrusion attempts, access rates, bytes-transferred rates, and error rates of network nodes. Unique precursor event links drill down instantly to the causes of downtime, intrusion events, etc. Performance graphs highlight element throughput and error rate. Hardware and software sub-systems within nodes are tracked and reported separately but in a common format that makes possible direct comparison. True hardware uptime is reported so that hardware and software performance can be separated from that of the communications links and from each other. Summary reports and alerts aggregate a view of an entire network's status onto a single page. Reports are provided via web pages posted to a web server for instant access to results. E-mailed text alerts provide prompt notification of dangerous conditions. NEPM is managed via a browser interface, providing full local or remote control from anywhere on the network. Use NEPM to increase your network uptime, increase network security, monitor QOS and SLA's, and evaluate new equipment. Equipment monitored can be Windows or Linux/UNIX/FreeBSD servers, or any processor-based system that logs events to non-volatile storage and has a telnet/rlogin/ssh/IP stream-mode interface Trojan Scan Added 2005-11-30 Trojan scan is a simple shell script that allows for simple but relatively effective checking for trojans, rootkits and other malware that may be using your server and network for unwanted (and possibly illegal) purposes. It works by listing all processes that use the Internet with the lsof command (using -Pni flags). This list is then transformed into signatures. These signatures then are matched against the allowed process defined in the configuration. If any signatures of running processes are found that do not match the allowed signatures, an email report is sent including ps, ls, and optional lsof output. GeSWall Added 2005-11-18 GeSWall ensures safe use of the internet applications. It protects you from intrusions and damage from malicious software by isolating vulnerable applications. Isolation applies an access restriction policy that effectively prevents all kinds of attacks, known and unknown. Prelude Hybrid IDS Framework Added 2005-09-21 Prelude is a Hybrid IDS framework, that is, a product enabling all security applications, be it open-source or proprietary, to report to a centralized system. In order to achieve this task, Prelude relies on the IDMEF (Intrusion Detection Message Exchange Format) IETF standard, that enables different kinds of sensors to generate events using a unique language. KFSensor Added 2005-07-27 KFSensor is a Windows based honeypot Intrusion Detection System (IDS). It acts as a honeypot to attract and detect hackers and worms by simulating vulnerable system services and trojans. By acting as a decoy server it can divert attacks from critical systems and provide a higher level of information than can be achieved by using firewalls and NIDS alone. KFSensor is designed for use in a Windows based corporate environment and contains many innovative and unique features such as remote management, a Snort compatible signature engine and emulations of Windows networking protocols. With its GUI based management console, extensive documentation and low maintenance, KFSensor provides a cost effective way of improving an organization's network security. File System Saint Added 2005-03-21 A fast, flexible, lightweight perl-based host IDS. Linux Intrusion Detection System (LIDS) Added 2004-05-17 The Linux Intrusion Detection System is a patch which enhances the kernel's security. When it is in effect, chosen files access, all system/network administration operations, any capability use, raw device, mem, and I/O access can be made impossible even for root. You can define which program can access which file. It uses and extends the system capabilities bounding set to control the whole system and adds some network and filesystem security features to the kernel to enhance the security. You can finely tune the security protections online, hide sensitive processes, receive security alerts through the network, and more. Sentry Firewall CD-ROM Added 2004-04-30 Sentry Firewall CD-ROM Version 1.0 is a Linux based bootable CD-ROM suitable for use as an inexpensive and easy to maintain Firewall or IDS(Intrusion Detection System) Node. The system is designed to be immediately configurable for a variety of different operating environments via a configuration file located on a floppy disk or a local hard drive. OSIRIS Added 2004-04-27 Osiris is a host integrity management system that can be used to monitor changes to a network of hosts over time and report those changes back to the administrator(s). Currently, this includes monitoring any changes to the filesystems. Osiris takes periodic snapshots of the filesystem and stores them in a database. These databases, as well as the configurations and logs, are all stored on a central management host. When changes are detected, Osiris will log these events to the system log and optionally send email to an administrator. In addition to files, Osiris has preliminary support for the monitoring of other system information including user lists, file system details, kernel modules, and network interface configurations (not included with in this beta release). Rule-based Intrusion Detection System 1.0 (Default) Added 2004-03-05 RIDS is a machine learning rule-based intrusion detection system for Linux. Browse by category |
|
Privacy Statement |