Microsoft Security Bulletin MS04-032Security Update for Microsoft Windows (840987)Issued: October 12, 2004 SummaryWho should read this document: Customers who use Microsoft Windows Impact of Vulnerability: Remote Code Execution Maximum Severity Rating: Critical Recommendation: Customers should install the update immediately. Security Update Replacement: This bulletin replaces several prior security updates. See the frequently asked questions (FAQ) section of this bulletin for the complete list. Caveats: Microsoft Knowledge Base Article 840987 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 840987. Tested Software and Security Update Download Locations: Affected Software:
Non-Affected Software:
The software in this list has been tested to determine if the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support lifecycle for your product and version, visit the following Microsoft Support Lifecycle Web site. General Information
Executive Summary: This update resolves several newly-discovered, privately reported vulnerabilities. Each vulnerability is documented in this bulletin in its own Vulnerability Details section. An attacker who successfully exploited the most severe of these vulnerabilities could take complete control of an affected system, including installing programs; viewing, changing, or deleting data; or creating new accounts that have full privileges. We recommend that customers apply the update immediately. Severity Ratings and Vulnerability Identifiers:
This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.
Why does this update address several reported security vulnerabilities? What updates does this release replace?
I am still using Windows XP, but extended security update support ended on September 30th, 2004. However, this bulletin has a security update for this operating system version. Why is that? The original version of Windows XP, commonly known as Windows XP Gold or Windows XP Release to Manufacturing (RTM) version, reached the end of its extended security update support life cycle on September 30, 2004. However, the end-of-life occurred very recently. In this case, the majority of the steps that are required to address this vulnerability were completed before this date. Therefore, we have decided to release a security update for this operating system version as part of this security bulletin. For more information, see the Windows Operating System FAQ. I am still using Microsoft Windows NT 4.0 Workstation Service Pack 6a or Windows 2000 Service Pack 2, but extended security update support ended on June 30, 2004. What should I do? It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Life Cycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the following Microsoft Product Support Services Web site. Customers who require additional support for Windows NT Workstation 4.0 SP6a must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers wihtout an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of phone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System FAQ. How does the extended support for Windows 98, Windows 98 Second Edition, and Windows Millennium Edition affect the release of security updates for these operating systems? For more information about severity ratings, visit the following Web site. Are Windows 98, Windows 98 Second Edition, or Windows Millennium Edition critically affected by any of the vulnerabilities that are addressed in this security bulletin? Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine if this update is required? Note After April 20, 2004, the Mssecure.xml file that is used by MBSA 1.1.1 and earlier versions is no longer being updated with new security bulletin data. Therefore, scans that are performed after that date with MBSA 1.1.1 or earlier will be incomplete. All users should upgrade to MBSA 1.2 because it provides more accurate security update detection and supports additional products. Users can download MBSA 1.2 from the MBSA Web site. For more information about MBSA support, visit the following Microsoft Baseline Security Analyzer 1.2 Q&A Web site. Can I use Systems Management Server (SMS) to determine if this update is required?
A privilege elevation vulnerability exists in the Window Management application programming interfaces (APIs). This vulnerability could allow a logged on user to take complete control of the system.
An attacker must have valid logon credentials and be able to logon locally to exploit this vulnerability. The vulnerability could not be exploited remotely or by anonymous users.
None.
What is the scope of the vulnerability? What causes the vulnerability? What are the Window Management application programming interface functions? What might an attacker use the vulnerability to do? Who could exploit the vulnerability? How could an attacker exploit the vulnerability? What systems are primarily at risk from the vulnerability? Are Windows 98, Windows 98 Second Edition or Windows Millennium Edition critically affected by this vulnerability? Could the vulnerability be exploited over the Internet? What does the update do? When this security bulletin was issued, had this vulnerability been publicly disclosed? When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
A local privilege elevation vulnerability exists in the operating system component that handles the Virtual DOS Machine (VDM) subsystem. This vulnerability could allow a logged on user to take complete control of the system.
None.
What is the scope of the vulnerability? What causes the vulnerability? What is the virtual DOS machine subsystem? What might an attacker use the vulnerability to do? Who could exploit the vulnerability? How could an attacker exploit this vulnerability? What systems are primarily at risk from the vulnerability? Could the vulnerability be exploited over the Internet? What does the update do? When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? How does this vulnerability relate to the virtual DOS machine vulnerability that is corrected by MS04-011?
A remote code execution vulnerability in the rendering of Windows Metafile (WMF) and Enhanced Metafile (EMF) image formats that could allow remote code execution on an affected system. Any program that renders WMF or EMF images on the affected systems could be vulnerable to this attack. An attacker who successfully exploited this vulnerability could take complete control of an affected system.
Microsoft has tested the following workarounds. While these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified below.
What is the scope of the vulnerability? What causes the vulnerability? What are Windows Metafile (WMF) and Enhanced Metafile (EMF) image formats? For more information about image types and formats, see Microsoft Knowledge Base Article 320314. Additional information about these file formats is also available at the MSDN Library Web site. What might an attacker use the vulnerability to do? How could an attacker exploit this vulnerability?
An attacker could also access the affected component through another vector. For example, an attacker could log on to the system interactively or by using another program that passes parameters to the vulnerable component (locally or remotely). To locally exploit this vulnerability, an attacker would first have to log on to the system. An attacker could then run a specially-designed application that could exploit the vulnerability, and thereby gain complete control over the affected system. What systems are primarily at risk from the vulnerability? In a Web-based attack scenario, an attacker would have to host a Web site that contains a Web page that is used to exploit this vulnerability. An attacker would have no way to force users to visit a malicious Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site. Could the vulnerability be exploited over the Internet? What does the update do? When this security bulletin was issued, had this vulnerability been publicly disclosed? When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? How does this vulnerability relate to the metafile vulnerability that is addressed by MS04-011? How does this vulnerability relate to the JPEG processing (GDI+) vulnerability that is addressed by MS04-028?
A local denial of service vulnerability exists in the Windows kernel. An attacker could locally run a program that could cause the affected system to stop responding.
None.
What is the scope of the vulnerability? Note The denial of service vulnerability would not allow attackers to execute code or elevate their privileges, but it could cause the affected system to stop accepting requests. What causes the vulnerability? What is the Windows kernel? What might an attacker use the vulnerability to do? Who could exploit the vulnerability? How could an attacker exploit the vulnerability? What systems are primarily at risk from the vulnerability? Could the vulnerability be exploited over the Internet? What does the update do? When this security bulletin was issued, had this vulnerability been publicly disclosed? When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
Installation Platforms and Prerequisites: For information about the specific security update for your platform, click the appropriate link:
Prerequisites Inclusion in Future Service Packs: Installation Information This security update supports the following setup switches: /help Displays the command line options Setup Modes /quiet Quiet mode (no user interaction or display) /passive Unattended mode (progress bar only) /uninstall Uninstalls the package Restart Options /norestart Do not restart when installation is complete /forcerestart Restart after installation Special Options /l Lists installed Windows hotfixes or update packages /o Overwrite OEM files without prompting /n Do not backup files needed for uninstall /f Force other programs to close when the computer shuts down /extract Extracts files without starting setup Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the previous version of the setup utility uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article about the supported installation switches, see Microsoft Knowledge Base Article 262841. Deployment Information To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003: Windowsserver2003-kb840987-x86-enu /passive /quiet To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003: Windowsserver2003-kb840987-x86-enu /norestart For information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. Restart Requirement You must restart your system after you apply this security update. Removal Information To remove this update, use the Add or Remove Programs tool in Control Panel. System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB840987$\Spuninst folder. The Spuninst.exe utility supports the following setup switches: /?: Show the list of installation switches. /u: Use unattended mode. /f: Force other programs to quit when the computer shuts down. /z: Do not restart when the installation is complete. /q: Use Quiet mode (no user interaction). File Information The English version of this update has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. Windows Server 2003 Enterprise Edition, Windows Server 2003 Standard Edition, Windows Server 2003 Web Edition, and Windows Server 2003 Datacenter Edition: Date Time Version Size File name Folder ------------------------------------------------------------------------- 27-May-2004 00:33 5.2.3790.175 2,405,888 Ntkrnlmp.exe RTMGDR 26-May-2004 23:51 5.2.3790.175 2,063,360 Ntkrnlpa.exe RTMGDR 26-May-2004 23:51 5.2.3790.175 2,105,856 Ntkrpamp.exe RTMGDR 27-May-2004 00:35 5.2.3790.175 2,206,208 Ntoskrnl.exe RTMGDR 09-Aug-2004 22:48 5.2.3790.198 1,812,992 Win32k.sys RTMGDR 01-Jun-2004 18:06 5.2.3790.177 2,407,424 Ntkrnlmp.exe RTMQFE 01-Jun-2004 17:37 5.2.3790.177 2,064,384 Ntkrnlpa.exe RTMQFE 01-Jun-2004 17:37 5.2.3790.177 2,108,928 Ntkrpamp.exe RTMQFE 01-Jun-2004 18:13 5.2.3790.177 2,207,232 Ntoskrnl.exe RTMQFE 19-Aug-2004 21:53 5.2.3790.202 1,814,528 Win32k.sys RTMQFE Windows Server 2003 64-Bit Enterprise Edition and Windows Server 2003 64-Bit Datacenter Edition: Date Time Version Size Filename Platform Folder ------------------------------------------------------------------------- 10-Aug-2004 02:10 5.2.3790.198 4,952,576 Win32k.sys IA-64 RTMGDR 19-Aug-2004 21:44 5.2.3790.202 4,956,672 Win32k.sys IA-64 RTMQFE Note When you install this security update on Windows Server 2003 or on Windows XP 64-Bit Edition Version 2003, the installer checks to see if any of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE files to your system. Otherwise, the installer copies the RTMGDR files to your system. For more information, see Microsoft Knowledge Base Article 824994. Verifying Update Installation
Note For Windows XP 64-Bit Edition Version 2003, this security update is the same as the Windows Server 2003 64-Bit Edition security update. Prerequisites Inclusion in Future Service Packs: Installation Information This security update supports the following setup switches: /help Displays the command line options Setup Modes /quiet Quiet mode (no user interaction or display) /passive Unattended mode (progress bar only) /uninstall Uninstalls the package Restart Options /norestart Do not restart when installation is complete /forcerestart Restart after installation Special Options /l Lists installed Windows hotfixes or update packages /o Overwrite OEM files without prompting /n Do not backup files needed for uninstall /f Force other programs to close when the computer shuts down /extract Extracts files without starting setup Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the previous version of the setup utility uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. Deployment Information To install the security update without any user intervention, use the following command at a command prompt for Windows XP: Windowsxp-kb840987-x86-enu /passive /quiet To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP: Windowsxp-kb840987-x86-enu /norestart For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. Restart Requirement You must restart your system after you apply this security update. Removal Information To remove this security update, use the Add or Remove Programs tool in Control Panel. System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe is located in the %Windir%\$NTUninstallKB840987$\Spuninst folder. The Spuninst.exe utility supports the following setup switches: /?: Show the list of installation switches. /u: Use unattended mode. /f: Force other programs to quit when the computer shuts down. /z: Do not restart when the installation is complete. /q: Use Quiet mode (no user interaction). File Information The English version of this update has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. Windows XP Home Edition, Windows XP Professional, Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, and Windows XP Media Center Edition: Date Time Version Size File name Folder ------------------------------------------------------------------- 17-Jun-2004 17:55 5.1.2600.159 48,128 Basesrv.dll RTMQFE 17-Jun-2004 17:55 5.1.2600.151 241,664 Gdi32.dll RTMQFE 17-Jun-2004 17:55 5.1.2600.153 898,048 Kernel32.dll RTMQFE 30-Mar-2004 01:25 5.1.2600.132 36,864 Mf3216.dll RTMQFE 17-Jun-2004 17:00 5.1.2600.160 1,849,856 Ntkrnlmp.exe RTMQFE 17-Jun-2004 17:00 5.1.2600.160 1,903,872 Ntkrnlpa.exe RTMQFE 17-Jun-2004 17:00 5.1.2600.160 1,877,504 Ntkrpamp.exe RTMQFE 17-Jun-2004 17:00 5.1.2600.160 1,881,856 Ntoskrnl.exe RTMQFE 14-Jun-2004 18:27 5.1.2600.157 395,264 Ntvdm.exe RTMQFE 17-Jun-2004 17:55 5.1.2600.153 13,312 Ntvdmd.dll RTMQFE 17-Jun-2004 17:55 1,055,610 Sysmain.sdb RTMQFE 17-Jun-2004 17:55 5.1.2600.152 528,896 User32.dll RTMQFE 17-Jun-2004 17:55 5.1.2600.153 23,040 Vdmdbg.dll RTMQFE 04-Aug-2004 00:54 5.1.2600.166 1,648,384 Win32k.sys RTMQFE 17-Jun-2004 17:55 5.1.2600.153 272,896 Winsrv.dll RTMQFE 05-Jun-2004 02:21 5.1.2600.156 245,760 Wow32.dll RTMQFE 17-Jun-2004 17:58 5.1.2600.1566 47,616 Basesrv.dll SP1QFE 17-Jun-2004 17:58 5.1.2600.1561 257,536 Gdi32.dll SP1QFE 17-Jun-2004 17:58 5.1.2600.1560 930,816 Kernel32.dll SP1QFE 17-May-2004 22:48 3.10.0.103 92,224 Krnl386.exe SP1QFE 30-Mar-2004 01:48 5.1.2600.1331 36,864 Mf3216.dll SP1QFE 17-May-2004 22:43 33,840 Ntio.sys SP1QFE 17-May-2004 22:43 34,560 Ntio404.sys SP1QFE 17-May-2004 22:43 35,648 Ntio411.sys SP1QFE 17-May-2004 22:43 35,424 Ntio412.sys SP1QFE 17-May-2004 22:43 34,560 Ntio804.sys SP1QFE 17-Jun-2004 08:02 5.1.2600.1568 1,899,008 Ntkrnlmp.exe SP1QFE 17-Jun-2004 08:03 5.1.2600.1568 1,954,688 Ntkrnlpa.exe SP1QFE 17-Jun-2004 08:03 5.1.2600.1568 1,926,656 Ntkrpamp.exe SP1QFE 17-Jun-2004 17:22 5.1.2600.1568 2,051,584 Ntoskrnl.exe SP1QFE 12-Jun-2004 01:14 5.1.2600.1564 396,288 Ntvdm.exe SP1QFE 17-Jun-2004 17:58 5.1.2600.1560 13,312 Ntvdmd.dll SP1QFE 17-Jun-2004 17:58 5.1.2600.1561 560,128 User32.dll SP1QFE 17-Jun-2004 17:58 5.1.2600.1560 23,040 Vdmdbg.dll SP1QFE 05-Aug-2004 18:15 5.1.2600.1581 1,845,888 Win32k.sys SP1QFE 27-May-2004 01:38 5.1.2600.1557 483,328 Winlogon.exe SP1QFE 17-Jun-2004 17:58 5.1.2600.1561 276,992 Winsrv.dll SP1QFE 04-Jun-2004 00:43 5.1.2600.1562 245,760 Wow32.dll SP1QFE Windows XP 64-Bit Edition Service Pack 1: Date Time Version Size File name Platform Folder -------------------------------------------------------------------------------- 17-Jun-2004 18:05 5.1.2600.1556 885,248 Gdi32.dll IA-64 SP1QFE 30-Mar-2004 01:45 5.1.2600.1331 128,512 Mf3216.dll IA-64 SP1QFE 17-Jun-2004 18:05 5.1.2600.1557 1,483,264 User32.dll IA-64 SP1QFE 17-Jun-2004 00:45 5.1.2600.1567 5,627,520 Win32k.sys IA-64 SP1QFE 05-Aug-2004 17:27 5.1.2600.1581 5,629,952 Win32k.sys IA-64 SP1QFE 17-Jun-2004 17:58 5.1.2600.1561 237,568 Wgdi32.dll x86 SP1QFE\WOW 30-Mar-2004 01:48 5.1.2600.1331 36,864 Wmf3216.dll x86 SP1QFE\WOW 17-Jun-2004 17:58 5.1.2600.1561 556,544 Wuser32.dll x86 SP1QFE\WOW Windows XP 64-Bit Edition Version 2003: Date Time Version Size Filename Platform Folder ------------------------------------------------------------------------- 10-Aug-2004 02:10 5.2.3790.198 4,952,576 Win32k.sys IA-64 RTMGDR 19-Aug-2004 21:44 5.2.3790.202 4,956,672 Win32k.sys IA-64 RTMQFE Notes The Windows XP and Windows XP 64-Bit Edition Version 2003 versions of this security update are packaged as dual-mode packages, which contain files for both the original version of Windows XP and Windows XP Service Pack 1 (SP1). For more information about dual-mode packages, see Microsoft Knowledge Base Article 328848. When you install the Windows XP 64-Bit Edition Version 2003 security update, the installer checks to see if any of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE files to your system. Otherwise, the installer copies the RTMGDR files to your system. For more information, see Microsoft Knowledge Base Article 824994. Verifying Update Installation
Prerequisites The software that is listed has been tested to determine if the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support lifecycle for your product and version, visit the Microsoft Support Lifecycle Web site. For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910. Inclusion in Future Service Packs: Installation Information This security update supports the following setup switches: /help Displays the command line options Setup Modes /quiet Quiet mode (no user interaction or display) /passive Unattended mode (progress bar only) /uninstall Uninstalls the package Restart Options /norestart Do not restart when installation is complete /forcerestart Restart after installation Special Options /l Lists installed Windows hotfixes or update packages /o Overwrite OEM files without prompting /n Do not backup files needed for uninstall /f Force other programs to close when the computer shuts down /extract Extracts files without starting setup Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the previous version of the setup utility uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. Deployment Information To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 3 and Windows 2000 Service Pack 4: Windows2000-kb840987-x86-enu /passive /quiet To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 3 and Windows 2000 Service Pack 4: Windows2000-kb840987-x86-enu /norestart For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. Restart Requirement You must restart your system after you apply this security update. Removal Information To remove this security update, use the Add or Remove Programs tool in Control Panel. System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB840987$\Spuninst folder. The Spuninst.exe utility supports the following setup switches: /?: Show the list of installation switches. /u: Use unattended mode. /f: Force other programs to quit when the computer shuts down. /z: Do not restart when the installation is complete. /q: Use Quiet mode (no user interaction). File Information The English version of this update has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. Note Date, time, file name, or size information could change during installation. See the Verifying Update Installation section for details on verifying an installation. Windows 2000 Service Pack 3 and Windows 2000 Service Pack 4: Date Time Version Size File name Folder --------------------------------------------------------------------- 17-Jun-2004 23:05 5.0.2195.6951 46,352 Basesrv.dll 21-Sep-2003 00:45 5.0.2195.6824 236,304 Cmd.exe 17-Jun-2004 23:05 5.0.2195.6945 231,184 Gdi32.dll 17-Jun-2004 23:05 5.0.2195.6946 712,464 Kernel32.dll 19-Jun-2003 20:05 3.10.0.103 92,032 Krnl386.exe 17-Jun-2004 23:05 5.0.2195.6898 37,136 Mf3216.dll 10-Feb-2004 19:47 5.0.2195.6897 30,160 Mountmgr.sys 17-Jun-2004 23:05 5.0.2195.6824 54,544 Mpr.dll 17-Jun-2004 23:05 5.0.2195.6928 335,120 Msgina.dll 19-Jun-2003 20:05 33,824 Ntio.sys 19-Jun-2003 20:05 34,544 Ntio404.sys 19-Jun-2003 20:05 35,648 Ntio411.sys 19-Jun-2003 20:05 35,408 Ntio412.sys 19-Jun-2003 20:05 34,544 Ntio804.sys 17-Jun-2004 17:15 5.0.2195.6952 1,704,128 Ntkrnlmp.exe 17-Jun-2004 17:15 5.0.2195.6952 1,703,744 Ntkrnlpa.exe 17-Jun-2004 17:15 5.0.2195.6952 1,725,440 Ntkrpamp.exe 17-Jun-2004 17:14 5.0.2195.6952 1,680,960 Ntoskrnl.exe 27-May-2004 00:54 5.0.2195.6946 398,096 Ntvdm.exe 17-Jun-2004 23:05 5.0.2195.6946 14,096 Ntvdmd.dll 24-Mar-2004 02:17 5.0.2195.6892 90,264 Rdpwd.sys 16-May-2004 19:43 5.0.2195.6928 5,873,664 Sp3res.dll 24-Mar-2004 02:17 5.0.2195.6897 403,216 User32.dll 05-Aug-2003 22:14 5.0.2195.6794 385,808 Userenv.dll 17-Jun-2004 23:05 5.0.2195.6946 29,456 Vdmdbg.dll 10-Aug-2004 03:51 5.0.2195.6966 1,632,624 Win32k.sys 24-Aug-2004 22:59 5.0.2195.6970 182,544 Winlogon.exe 17-Jun-2004 23:05 5.0.2195.6946 244,496 Winsrv.dll 17-Jun-2004 23:05 5.0.2195.6946 239,888 Wow32.dll 17-Jun-2004 23:05 5.0.2195.6946 712,464 Kernel32.dll Uniproc 10-Aug-2004 03:51 5.0.2195.6966 1,632,624 Win32k.sys Uniproc 17-Jun-2004 23:05 5.0.2195.6946 244,496 Winsrv.dll Uniproc Verifying Update Installation
Prerequisites Note: Microsoft Knowledge Base Article 840987 documents the currently known issues that customers may experience when they install this security update on Windows NT 4.0 Server and Windows NT 4.0 Terminal Server Edition systems. If you install software updates to a Windows NT 4.0-based computer that has a system partition that is larger than 7.8 GB, your computer may not restart correctly. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 840987. The software that is listed has been tested to determine if the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support lifecycle for your product and version, visit the following Microsoft Support Lifecycle Web site. For more information about obtaining the latest service pack, see Microsoft Knowledge Base Article 152734. Installation Information This security update supports the following setup switches: /y: Perform removal (only with /m or /q ) /f: Force programs to quit during the shutdown process /n: Do not create an Uninstall folder /z: Do not restart when the update completes /q: Use Quiet or Unattended mode with no user interface (this switch is a superset of /m ) /m: Use Unattended mode with a user interface /l: List the installed hotfixes /x: Extract the files without running Setup Note You can combine these switches into one command. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. Deployment Information To install the security update without any user intervention, use the following command at a command prompt for Windows NT Server 4.0: Windowsnt4server-kb840987-x86-enu /q For Windows NT Server 4.0 Terminal Server Edition: Windowsnt4terminalserver-kb840987-x86-enu /q To install the security update without forcing the system to restart, use the following command at a command prompt for Windows NT Server 4.0: Windowsnt4server-kb840987-x86-enu /z For Windows NT Server 4.0 Terminal Server Edition: Windowsnt4terminalserver-kb840987-x86-enu /z For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. Restart Requirement You must restart your system after you apply this security update. Removal Information To remove this security update, use the Add/Remove Programs tool in Control Panel. System administrators can also use the Hotfix.exe utility to remove this security update. The Hotfix.exe utility is located in the %Windir%\$NTUninstallKB840987$ folder. The Hotfix.exe utility supports the following setup switches: /y: Perform removal (only with the /m or /q switch) /f: Force programs to quit during the shutdown process /n: Do not create an Uninstall folder /z: Do not restart when the installation is complete /q: Use Quiet or Unattended mode with no user interface (this switch is a superset of the /m switch) /m: Use Unattended mode with a user interface /l: List the installed hotfixes File Information The English version of this update has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. Note Date, time, file name, or size information could change during installation. See the Verifying Update Installation section for details on verifying an installation. Windows NT Server 4.0: Date Time Version Size File name ---------------------------------------------------------- 08-Jun-2004 14:19 4.0.1381.7270 206,096 Gdi32.dll 23-Feb-2004 15:13 4.0.1381.7263 40,720 Mf3216.dll 22-Apr-2004 17:26 4.0.1381.7267 958,464 Ntkrnlmp.exe 22-Apr-2004 17:26 4.0.1381.7267 938,048 Ntoskrnl.exe 08-Jun-2004 14:19 4.0.1381.7273 326,928 User32.dll 03-Aug-2004 12:31 4.0.1381.7292 1,255,472 Win32k.sys 08-Jun-2004 14:19 4.0.1381.7260 174,864 Winsrv.dll Windows NT Server 4.0 Terminal Server Edition: Date Time Version Size File name ------------------------------------------------------- 20-May-2004 18:23 4.0.1381.33566 206,096 Gdi32.dll 24-Feb-2004 18:25 4.0.1381.33562 40,208 Mf3216.dll 21-May-2004 16:41 4.0.1381.33568 1,004,160 Ntkrnlmp.exe 21-May-2004 16:41 4.0.1381.33568 983,104 Ntoskrnl.exe 20-May-2004 18:23 4.0.1381.33552 332,048 User32.dll 03-Aug-2004 12:41 4.0.1381.33580 1,280,944 Win32k.sys 20-May-2004 18:23 4.0.1381.33559 196,368 Winsrv.dll Verifying Update Installation
Acknowledgments Microsoft thanks the following for working with us to help protect customers:
Obtaining Other Security Updates: Updates for other security issues are available from the following locations:
Support:
Security Resources:
Software Update Services: By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional. For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. Systems Management Server: Microsoft Systems Management Server (SMS) delivers a highly-configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and to perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, see the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site. Note SMS uses the Microsoft Baseline Security Analyzer and the Microsoft Office Detection Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, see the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates. Disclaimer: The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply. Revisions:
|