|
Exchange Server 2007 Beta 2 System RequirementsPublished: June 11, 2006 Note: Beta system requirements are subject to change. Processor | 32-bit Trial: | • | Intel Pentium 800 (MHz) or higher processor |
64-bit Trial | • | x64 architecture-based computer with: | • | Intel Xeon or Intel Pentium Family processor that supports Intel Extended Memory 64 Technology (Intel EM64T) or | | • | AMD Opteron or AMD Athlon 64 processor that supports AMD64 platform |
|
Intel Itanium IA64 processors are not supported | Operating system | 32-bit version trial: Microsoft Windows Server 2003 SP1 or Windows Server 2003 R2, Standard or Enterprise Editions 64-bit version trial: Microsoft Windows Server 2003 x64 or Windows Server 2003 x64 R2 Standard or Enterprise Editions For more information on the localized Exchange Server 2007 Beta 2 experience and operating system requirements please see: www.microsoft.com/exchange/OperatingSystemLang. | Memory | For Beta 2, 2 gigabytes (GBs) of RAM per server minimum. 2 gigabytes (GBs) of RAM per server + 5 megabytes (MBs) of RAM per user recommended.  Note The above minimum requirements and recommendations are based on our internal testing of Beta 2. These requirements and recommendations may change in the release to manufacturing version of Exchange 2007. The recommended memory configuration is suggested as a way to optimize performance for Exchange 2007. Specifically, it allows Exchange to use an appropriately sized database cache, which reduces database disk I/O. These recommendations are oriented towards authorized production environments that have many users with large, frequently used mailboxes. | Available hard-disk space | You need: | • | At least 1.2GB on the hard disk where you install Exchange Server 2007 | • | Additional 500MB of available hard-disk space per language if installing language packs for Unified Messaging beyond those included in the default installation | | • | Additional space is needed when using Local Continuous Replication or Cluster Continuous Replication (the amount of space required depends on the size of the storage groups being replicated) |
| | • | 200 MB on the system drive |
| Drive | DVD, local or network accessible | File format | Disk partitions must be formatted for the NTFS file system, not the file allocation table (FAT) file system. This requirement applies to: | • | System partition | | • | Partition storing Exchange Server binaries | | • | Partitions containing transaction log files | | • | Partitions containing database files | | • | Partitions containing other Exchange Server files |
| Prerequisite Software Required | | • | Microsoft .NET Framework Version 2.0 | | • | Microsoft Management Console (MMC) 3.0 | | • | Windows PowerShell (for Exchange Management Shell) |
Should these required prerequisites not be installed, the Exchange Server 2007 setup process will prompt and provide links to the installation location. Internet access will be required if the prerequisites are not already installed or available on a local network. |
Additional software required to use specific features in Exchange Server 2007: Note: You must install the latest updates for Windows XP, Windows Server 2003, and Outlook 2003. Supported PBXesTesting has been done with Cisco Call Manager version 5.0 for direct IP interoperability. All other PBXes will require one of the gateways listed below. The following PBXes are supported by the Intel NetStructure PBX-IP Media Gateway (PIMG): Avaya | Definity G3
S8100, S8300, S8700, & S8710 (Communications Mgr SW V2.0 or greater) | PIMG80DNIV4 | Avaya | Magix | PIMG80DNIV4 | Mitel | SX-200D, SX-200 Light, SX-2000 Light, SX-2000 S, SX-2000 VS, SX-200 ICP | PIMG80MTLDNIV4 | Nortel | Meridian 1 - Option 11, 21, 21A, 51, 61, 71, and 81
Meridian SL1 - Generic X11, Release 15 or greater
Nortel Communication Server - 1000M, 1000S, 1000E with Rls V3.0 or greater | PIMG80DNIV4
| Nortel | SL 100 | PIMG80LSV4
Analog connectivity using SMDI serial protocol | NEC | 2000, 2400, 2400 IPX | PIMG80DNIV4 | Siemens | HiCom 300E CS | PIMG80DNIV4 | Siemens | HiCom 300E (European) | PIMG80LSV4
Analog connectivity using Inband DTMF signaling. | Siemens | 8000 (SW release 80003 or greater)
9000 (All versions)
9751 (All version of SW release 9005)
9751 (SW release 9006.3 or greater) | PIMG80RLMDNIV4 | Ericsson | MD110 | PIMG80LSV4
Analog connectivity using the MD110 RS232 protocol | Intecom | | PIMG800LSV4 Analog connectivity using SMDI serial protocol | Others Including: | Various | PIMG80LSV4
Analog connectivity using either Inband DTMF or SMDI |
The following PBXes are supported by the Intel NetStructure T1/E1 Media Gateway (TIMG): Avaya | Definity G3 | Version 3 or greater | Avaya | S8500 | Communications Manager SW
V2.0 or greater | Mitel | SX-2000 S, SX-2000 VS | LW 34 | Mitel | 3300 | Version 5.1.4.8 | Nortel | Meridian 1- Option 11c | Release 15 or greater, and options 19 and 46 are required | NEC | 2400 IMX | Release 5200 Dec. 92 1b or greater | Siemens | Hicom 300E CS | Release 9006.4 or greater
(North American Software load only) | Siemens | HiPath 4000 | V2 SMR 9 SMPO |
The follow PBXes are supported through AudioCodes gateways (Mediant 2000, MediaPak 114 and MediaPak 118): Alcatel | OmniPCX 4400 | MediaPack 11x/FXO/AC/SIP-0 | Avaya | Definity G3 | MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIP/RS232
SMDI enablement is optional | Avaya | Magix/Merlin | MediaPack 11x/FXO/AC/SIP-0 | Intecom | EADS2001 | MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIP/RS232
SMDI enablement is mandatory | Mitel | SX-200, SX-2000 | MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIP/RS232 | NEC | Electra, Elite, IPX, 2000, 2400 IPX | MediaPack 11x/FXO/AC/SIP-0
| NEC | NEAX2400 | MediaPack 11x/FXO/AC/SIP-0
| Nortel | CS - 1000M, 1000S, 1000E | MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIP/RS232
SMDI enablement is mandatory | Nortel | SL 100 | MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIP/RS232
SMDI enablement is optional | Panasonic | KX-TD | MediaPack 11x/FXO/AC/SIP-0 | Siemens | HiCom 300, 9005, HiPath 3000/4000 | MediaPack 11x/FXO/AC/SIP-0
| Toshiba | DK | MediaPack 11x/FXO/AC/SIP-0
SMDI enablement is optional |
|
