Centring

Model of centring for a ribbed dome structure at Albrechtsburg.

Centring (UK), or centering (US), is the structure upon which the stones of arches or vault are laid during construction. Once the arch is complete, it supports itself, but until the keystone is inserted, it has no strength and needs the centring to keep the voussoirs in their correct relative positions.

The centring is normally made of wood, which was a relatively straightforward structure in a simple arch or vault, but with more complex shapes, involving double curvature, such as a small dome or the bottle-shaped flues of the kitchens of some Norman-period houses; clay or sand bound by a weak lime mortar mix could be used. The shaping of this sort of centring would probably be done by eye, perhaps with the help of a template and the stone or brick structure laid against it. On bigger work, like a 19th-century commercial pottery kiln, this was impractical. The structure would be built round a post acting as a datum, and each course of stonework would be set at a distance from the datum as measured by a stick or string.

On completion of the intended structure, the centring of whichever sort is removed, and work on pointing and other finishing continued.

Gallery

• 

  A simple arch centre suitable for single skin brickwork.

• 

  A centre for a flat segmental arch.

• 

  The centring for a semicircular arch.

See also

Catenary arch kiln under construction over temporary form

• falsework

External links

• An illustrated glossary of the terms used in temporary types of construction work. Formwork, scaffolding etc.