Lunar Orbiter 1

From Wikipedia, the free encyclopedia

Jump to: navigation, search
Lunar Orbiter 1

Organization NASA
Major contractors Langley Research Center
Mission type Orbiter
Satellite of Moon
Launch date August 10, 1966 at 19:26:00 UTC
Launch vehicle Atlas-Agena D
Decay Impacted lunar farside on October 29, 1966, at 6.35° N 160.72° E
Mission duration 80 days
NSSDC ID 1966-073A
Mass 385.6 kg
Orbital elements
Semimajor axis 2,694.0 km
Eccentricity .33
Inclination 12°
Orbital period 208.1 minutes
Apoapsis 1,860 km
Periapsis 52 km
Orbits 577

The Lunar Orbiter 1 robotic (unmanned) spacecraft, part of the Lunar Orbiter Program, was designed primarily to photograph smooth areas of the lunar surface for selection and verification of safe landing sites for the Surveyor and Apollo missions. It was also equipped to collect selenodetic, radiation intensity, and micrometeoroid impact data.

The spacecraft was placed in an Earth parking orbit on 10 August 1966 at 19:31 UT. The Trans lunar injection burn occurred at 20:04 UT. The spacecraft experienced a temporary failure of the Canopus star tracker (probably due to stray sunlight) and overheating during its cruise to the Moon. The star tracker problem was resolved by navigating using the Moon as a reference and the overheating was abated by orienting the spacecraft 36 degrees off-Sun to lower the temperature.

Lunar Orbiter 1 was injected into an elliptical near-equatorial lunar orbit 92.1 hours after launch. The initial orbit was 189.1 km x 1866.8 km and had a period of 3 hours 37 minutes and an inclination of 12.2 degrees. On 21 August perilune was dropped to 58 km and on 25 August to 40.5 km. The spacecraft acquired photographic data from 18 August to 29, 1966, and readout occurred through September 14, 1966.

A total of 42 high resolution and 187 medium resolution frames were taken and transmitted to Earth covering over 5 million square km of the Moon's surface, accomplishing about 75% of the intended mission, although a number of the early high-res photos showed severe smearing. It also took the first two pictures of the Earth ever from the distance of the Moon. Accurate data were acquired from all other experiments throughout the mission.

Orbit tracking showed a slight "pear-shape" to the Moon based on the gravity field, and no micrometeorite impacts were detected. The spacecraft was tracked until it impacted the lunar surface on command at 7 degrees N latitude, 161 degrees E longitude (selenographic coordinates) on the Moon's far side on October 29, 1966 on its 577th orbit. The early end to the nominal one year mission was due to the small amount of remaining attitude control gas and other deteriorating conditions and was planned to avoid transmission interference with Lunar Orbiter 2.

Instruments
Lunar Photographic Studies Evaluation of Apollo and Surveyor landing sites
Meteoroid Detectors Detection of micrometeoroids in the lunar environment
Cesium Iodide Dosimeters Radiation environment en route to and near the Moon
Selenodesy Gravitational field and physical properties of the Moon

[edit] External links


 

Lunar Orbiter program Lunar Orbiter 1
Previous mission:  First in series Next mission:  Lunar Orbiter 2
Lunar Orbiter 1 | Lunar Orbiter 2 | Lunar Orbiter 3 | Lunar Orbiter 4 | Lunar Orbiter 5

This article contains material that originally came from a NASA website. According to their site usage guidelines, "NASA material is not protected by copyright unless noted". For more information, please review NASA's use guidelines.

Personal tools
Languages