Assisted GPS

From Wikipedia, the free encyclopedia

Assisted GPS, generally abbreviated as A-GPS, enhances the startup performance of a GPS satellite-based positioning system. It is used extensively with GPS-capable cellular phones as its development was accelerated by the U.S. FCC's 911 mandate making the location of a cell phone available to emergency call dispatchers.^[1]

Contents 1 Description 2 Development 3 See also 4 References

[edit] Description

Conventional GPS has difficulty providing reliable positions in poor signal conditions. For example when surrounded by tall buildings (as a result of multipath), or when the satellite signals are weakened by being indoors or under trees. Some newer receivers are better at handling these situations.

In addition, when first turned on in these conditions, some non-assisted GPS units may not be able to download the almanac and ephemeris information from the GPS satellites, rendering them unable to function until a clear signal can be received continuously for up to one minute.

An A-GPS receiver can address these problems in several ways, using an assistance server:

• The assistance server can locate the phone roughly by what cell site it is connected to on the cellular network.
• The assistance server has a good satellite signal, and lots of computation power, so it can compare fragmentary signals relayed to it by cell phones, with the satellite signal it receives directly, and then inform the cell phone or emergency services of the cell phone's position.
• It can supply orbital data for the GPS satellites to the cell phone, enabling the cell phone to lock to the satellites when it otherwise could not, and autonomously calculate its position.
• By having accurate, surveyed coordinates for the cell site towers, it can have better knowledge of ionospheric conditions and other errors affecting the GPS signal than the cell phone alone, enabling more precise calculation of position. (See also Wide Area Augmentation System)

As an additional benefit, it can reduce both the amount of CPU and programming required for a GPS Phone by offloading most of the work onto the assistance server. (This is not a large amount for a basic GPS – many early GPSs utilized Intel 80386-class 16MHz CPUs or similar hardware.)

A typical A-GPS-enabled cell phone will use an internet connection to contact the assistance server. Alternatively, it may use standard non-assisted GPS, which is slower and less accurate, but does not lead to network charges for data traffic, which can be considerable.^[2] Some A-GPS solutions do not have the option of falling back to conventional GPS.^{[citation needed]}

High Sensitivity GPS is an allied technology that addresses some of the same issues in a way that does not require additional infrastructure. However, unlike some forms of A-GPS, high sensitivity GPS cannot provide instant fixes when the phone has been off for some time.

[edit] Development

CSR is developing eGPS, which is claimed to have greatly improved performance over existing solutions.

[edit] See also

• List of devices with Assisted GPS
• High Sensitivity GPS
• GNSS Augmentation
• Wide Area Augmentation System
• Differential GPS
• Inertial Navigation System

[edit] References