Fifteen inches of Model kit mayhem from Kotobukiya.

This thing is HUGE. 38cm tall (about 15 inches) 1/144 scale plastic model kit from Kotobukiya. Due 12/08 for 31,290 yen.

Rei and Shinji in their Eva Unit Entry plugs, with handy applicator tip.

I hope to god these things aren't removable from their bases.

Anyway, in Evangelion - the Eva pilots get in a cylinder, called a plug, that is then inserted behind the head. I'm actually surprised we haven't seen toys of these before. These two are from Skynet, looks like they are lit, and covers are retractable. Unknown size. Due 12/08 for 8,800 yen.

Rei Ayanami

Shinki Ikari

That's a whole lot of Kaiju!

Yeah, its expensive, but its a 1 meter kaiju! That's 1/48 scale! How awesome. Now finally there's something in scale with those Maser tanks. Due 10/08 for 39,900 yen, from Skynet.

While they are technically called kits, they are basically action figures you assemble.

I think the main reason these are called kits and come dissasembled is due to licensing issues. Regardless, these 1/20 scale Appleseed figures are HOT. The box retails for 15,000 yen and is due 10/2008.

This set is cute (little robots with squat bodies and big eyes usually are), practical, sufficiently gimmicky, and certainly a good representation of the character physically from the movie.

The Waste Allocation Load Lifter - Earth Class (aka WALL•E) was a mass-production robot built by the international monopolistic conglomerate Buy n Large in the 22nd Century to begin the long clean-up of human garbage & waste on Earth. Though only designed for a trial run of five years, the reality of the situation on the planet meant that it would instead take hundreds of years to affect clean-up safe enough for humans to return. And so, Earth was completely abandoned so that the WALL•E units could work more efficiently. Over the centuries, with a complete lack of outside support, the thousands of WALL•E units across the world worked themselves into ruin. By the 29th Century, only one remained fully functional- surviving by salvaging spare parts from its rundown comrades as a most-unexpected & unprecedented form of self-preservation; its unusual motivation to continue on functioning would eventually prove to be turning points for both humanity and itself.

Each WALL•E unit is a small trash compactor programmed to search out solid garbage, collect it within itself, and compress it into more-manageable trash cubes for later pick-up by other dedicated robots. In addition to the two small three-fingered hydraulic manipulators on either side of its chassis, each has a small laser cutting torch built in between their optical sensors on the sensor pod above which can cut larger garbage into smaller and easier-to-handle chunks for them to process. They roll on two tractor-tread assemblies and are able to climb difficult natural & artificial terrain such as stairs & junk heaps with the sophisticated traction & suspension within them. To make certain that they too do not contribute to the mess they are trying to clear, all WALL•E units use solar energy as their primary power source. When recharging, during difficult weather patterns, or in storage, each unit can retract the sensor pod, manipulators, and tractor-tread assemblies into the hollow interior to make a compact cube shape.

U-Repair WALL•E (back) stands 3 15/16” (10.2cm)-tall when all of the accessory parts have been added, and is designed around the story element from the summer 2008 movie that this particular unit tried to keep itself functional by swapping parts from its broken brethren ‘bots. The set contains 20 parts which come pre-assembled in the packaging, but serve as the main gimmick of this particular toy. The separate components are:

• eye camera sensors (Right & Left)
• head
• neck
• hollow body
• storage compartment doors (Front & Back)
• chest control/indicator panel
• upper arm (Right & Left)
• lower arm & hand (x2)
• tractor assembly (Right & Left)
• tractor leg attachment piece (Right & Left)
• ragged tractor-tread belt (x2)
• complete tractor-tread belt (x2)

The only duplicate parts are the tractor-tread belts- one pair are worn from use and look ragged, while the other pair look factory-fresh & undamaged. Since the two pairs of belts are symmetrical when slipped onto the tractor assemblies, it doesn’t matter which goes on which side. And, because WALL•E’s yellow ABS body is hollow, whichever pair of belts is not in use can be stored internally, keeping the set complete.

. . .

With the exception of the head-to-neck joint (which is a ball-&-socket) and the tractor-tread belts, all of the U-Repair WALL•E parts are snap-fit. Indeed, if you wish, you can even swap most of the components into kooky combinations! The only exception to this is that the tractor assemblies cannot snap onto anything other than the leg attachment parts; this is because the assemblies’ joints have tiny unique bars which prevent them from snapping onto anything else. However, the leg attachment parts themselves are still fully versatile in merging with the other components of the set. Though they can be separated, the two fingers on each hand are not meant to be removed, even though if too much pressure is applied they will pop-off. The control panel on the front of WALL•E’s chassis above the front storage compartment door can be removed, but Thinkway Toys incorporated a small tab-&-slot design on the inside which prevents you from installing it upside-down.

Since there is not nearly enough room or mechanics involved in this toy, WALL•E cannot store all of its parts inside of itself like it does in the movie, so simply removing most of them is sufficient to resemble its compacted storage form (back). (Yeah- you can store some of the smaller separated parts inside of him, but that space is obviously normally reserved just for whichever spare set of tractor-tread belts is not in use.) In storage form, its almost-cube-shaped body is 2 ½” (6.5cm) on its longest axis [front-to-back]. The similar-sized Transforming WALL•E action figure set, however, is specifically designed to fit all of the parts into it without separating them by means of spring-loaded internal mechanisms.

Removing U-Repair WALL•E’s limbs allows for a better look at the detailed molded surfaces on all of the components which closely resemble the ones on the CGI character from the film…

The plastic lenses for its eyes are indeed transparent, but inside of them is black plastic, so you can’t see what’s really in there even though they reflect light well enough. Though the panels on the top of its eye camera sensor parts which resemble eyebrows, they are molded in and do not move as in the movie. On the back of its head is a single black PVC part resembling cables going into its eye cameras; these cannot be removed but the material is flexible so that its eyes can still tilt up-&-down. All six sides of its yellow body have panels painted gray, and lines highlighted. Of particular interest is the fact that all fully-exposed yellow surfaces have weathered brown paint applications added to them to give WALL•E that worn, rusted, grungy, & beat-up appearance it has throughout most of the film. This applies just to the body and upper arms; no other surface has been weathered; and all plastic molds have not been altered- save one set of tractor-tread belts- to look worn either. The tractor assemblies do not extend or contract like they do in the movie; being molded into single parts. However, three of the wheels on each do freely rotate, with the fourth for decoration only. On both sides of the two largest wheels on the tractor assemblies, and on the back storage compartment door, is the logo for the fictitious Buy n Large corporation (abbreviated as “BnL”).

Other extra printed details include the control panel display which shows his “Solar Charge Level” [at full capacity], the official “WALL•E” label on the lower left corner of the front storage compartment door, and the black-&-white caution stripes on both upper arms. And, with the exception of the outside panels around the eye camera lenses, all other surfaces of the toy are unpainted.

Poseability for the U-Repair WALL•E set is fairly good. All of those snap twist-joints in the wrists, shoulders, and neck allow for a good range of motion, and there are additional alternate joints in the larger two fingers on each hand (they are molded together as one piece), a second shoulder joint beyond just the connecting peg, and a horizontal rod between the eyes which allow them to swivel up and down. The shoulder joints in the movie run along an angular “J”-shaped track on each side, allowing it to reach farther, or retract the arms. Here, the shoulders snap into just one hole located about mid-way along the upper horizontal track; unlike the larger electronic motorized InterAction WALL•E toy, the shoulders cannot be repositioned anywhere else since there is only one hole on each side along the non-functional track. WALL•E’s rather expressive binocular-shaped eye cameras can swing up and down just a little, but because the black plastic cord on the back of his head is actually rather inflexible, they always droop when left alone, so it always has a rather mournful expression. Unlike in the movie and several other toys, U-Repair WALL•E’s lower arms cannot telescope in and out, and so they stay at that one length all the time- the wrists just barely stretching beyond its body when the arms are pointed straight forward. Both tractor-tread belts- which are made of a flexible yet non-stretching material unlike rubber- can freely turn, allowing it to roll. (Those belts are tight enough that it doesn’t roll very easily, so you have to push down on it a bit to get them to spin. And even then, sometimes the inner wheels won’t turn, and the belts will just slide right around them. Don’t even try pushing it around on hard wood flooring- it’ll slip around like it’s on ice; it works best on short carpet.)

Having not actually seen “WALL•E” in theaters by the time this review was posted, I had to do my best to avoid spoilers for myself until it came out on DVD later in 2008. However, seeing the various trailers & reviews online allowed me to glimpse the tiny R2-D2-wannabe, it was inevitable that I would come across the character enough to become interested. And really, this is the only figure I found that I really wanted. The biggest reason was the ability to disassemble him to resemble its storage form, and that they provided a worn pair of tractor-tread belts to swap out. I did, however, see another figure that you could disassemble, Construct-A-Bot WALL•E, but I kept a good distance away from that one because it used magnets to keep the parts together, not snapping joints, so I knew it would never stay together after the first time I dropped a single part! Though this figure was the same size as ones that didn’t come apart, and instead came with trash cubes, I decided that I didn’t need the trash cubes to like the figure. While I was a little disappointed that the arms couldn’t telescope, the two larger fingers on each hand were molded together, and that it couldn’t reach far beyond its chest, I still find this a very satisfying representation. But, I wasn’t willing to spend over $30 for features like motorized rolling around and voice-activated features that- as an older collector- I would not have used much later on. Things to change? Other than those disappointments listed above, not really. I might, however, tighten those connection joints just a hair, though… The U-Repair WALL•E set is cute (little robots with squat bodies and big eyes usually are), practical, sufficiently gimmicky, and certainly a good representation of the character physically from the movie. And so I highly recommend getting the little trash-bot!

See the commercial for U-Repair WALL•E by Thinkway Toys!

(Be sure to look for more "WALL•E meets a" videos- they're hilarious too!)

large size Sofubi prize items from Banpresto

These Banpresto Big Size Sofubi are actually crane game prizes. How big "big size" is isn't exactly sure, but i'm thinking about 12 inches.

New ZOIDS kit from Kotobukiya!

ZOIDS EZ-016 Sabre Tiger, Schwartz Spec. model kit. 7,140 yen, due 01/09. How is it that Koto makes ZOIDS look better than takaratomy? Are they the same type of construction?

New Linebarrels kit from Kotobukiya. More awesome designs.

Yet another new Linebarrels of Iron model kit from Kotobukiya. This time its Overdrive Emi Kinosaki version.

1/144 scale, 4,200 yen, due 12/08

Yet another suprise announcement from Aoshima - the fantastic Drill submarine Kaiteigunkan aka Atragon!

Yet another suprise announcement from Aoshima - the fantastic drill submarine Kaiteigunkan aka Atragon! This diecast behemoth is 1/350 scale, 400mm long, diecast with electronic LED lights. Due October 2008 for 18,900¥.

Aoshima announces a new large scale gokin ship - the Queen Emeraldas from Captain Harlock

Aoshima announces a new large scale gokin ship - the Queen Emeraldas from Captain Harlock.

So far, three flavors have been anounced - Regular, Metallic, and Anime-Export ltd.

The ship will be 400mm long, feature led lights, and retail for 18,900 yen. Due October 2008

Get Get Gettaa! Gettaa Robo!

Even though we have had a ton of Getter robots reviewed here on CDX, we've really not talked much about the relevance of Getter Robo. Getter Robo is one of the Super Robot Icons.

Alongside Mazinger Z and Great Mazinger, Getter Robo fought on the airwaves of Japanese television in the early 70s. It had the fortune of being part of the massive merchandising wave that accompanied the shows of those days. It was like Toei had a direct link to what every 5 year old boy in 1974 wanted.

Getter Robo is important for many reasons, but largely because it was the first series to feature a combining robot. Getter Robo is a robot made by the combination of three ships - Getter Jaguar, Getter Bear and Getter Eagle. Depending on which order they combined, you got a different Getter Robo - Getter 1, 2, and 3. All three Getters got toys, but Getter 1 was by far the most popular, and the one who always finished the bad guy in the end.

Getter Robo never aired in the US, but its direct sequel, Getter Robo G, was aired in the US as part of Jim Terry's Force Five, renamed Starvengers. In fact, the first scene from the first episode of Getter Robo G shows Getter 1 burning up in flames. Toys from Getter Robo G would also reach the states in Mattel's Shogun Warriors line of toys.

The Chogokin line of toys was launched with the GA-01, Mazinger Z. The figure was a runaway success, so naturally, other toys in the line would follow, and the next up was GA-02, Getter 1. The toy was a full on chogokin - die cast metal and full of firing gimmicks.

Instead of firing fists, Getter 1 got fists that were simply removable. However one fist featured an axe-launching action.

Another gimmick was the spring loaded head. Push the head down and then press the button on the back and the head launches up, just like in the show.

The toy had a very folk-art feel. The metal was rough, the decals never wrapped quite right, and the sculpt was far from anime accurate. But it was Getter 1, and that was enough to inspire generations to come.

Being the Second chogokin, one would assume that obtaining this piece would set you back a tidy sum. Well, yeah, it will. But here's the thing. In the late 90s (early 2000's maybe?), an unscrupulous toy dealer in Hong Kong began making near-perfect reproductions of the GA-02. The reproduction is almost identical, right down to the box and packaging foam, making differentiating a bootleg from an original an arduous task. But this HK bootleg company did not stop there. In a surprising move, they also bootlegged the second version Getter 1 (with blue shoulders), and even released a training colors version - shown in the TV show but never made into a toy. Below is a handy guide to the differences between the two. (there aren't many).

Special thanks again to Joshua Fraser for allowing me to shoot this piece for CollectionDX.

Two new light armor Buso Shinki MMS figures from Konami

These two new Busou Shinki figures are priced at 2,900 yen each and are due 2/09

GMK Gojira, Red Jack, Garia and Bagun

GMK Gojira, 22cm, 5,250 yen, due 12/08

Bagun, 22cm, 5,250 yen, due 12/08

Red Jack, 22cm, 5,250 yen, due 12/08

Mini Girara, 15cm, 4200 yen, due 12/08

Brave Gokin EX-02 Dark Legioss comes with the legioss only - no Tread fighter. And its about $130.

CM's is releasing a Dark Legioss toy this month, from the last three episodes of Genesis Climber Mospeada. This toy is almost the same as the previous Brave Gokin release, meaning next to no metal, and substantially overpriced. Still, the quality is good, and if you are a diehard Mospeada Collector it may be worth it for you. Due 9/08, 13,440 yen.