River delta
From Wikipedia, the free encyclopedia
shape after which River deltas were named. Photo courtesy of NASA.A delta is a landform that is created at the mouth of a river where that river flows into an ocean, sea, estuary, lake, reservoir, flat arid area, or another river. Deltas are formed from the deposition of the sediment carried by the river as the flow leaves the mouth of the river. Over long periods of time, this deposition builds the characteristic geographic pattern of a river delta.
Herodotus the great historian coined the term delta for the Nile River delta because the sediment deposited at its mouth had the shape of the upper-case Greek letter Delta: Δ.
Contents |
[edit] Delta formation
River deltas form when a river carrying sediment reaches a body of standing water, such as a lake, ocean, or reservoir. When the flow enters the standing water, it is no longer confined to its channel and expands in width. This flow expansion results in a decrease in the flow velocity, which diminishes the ability of the flow to transport sediment. As a result, sediment drops out of the flow and deposits. Over time, this single channel will build a deltaic lobe (such as the bird's-foot of the Mississippi or Ural River deltas), pushing its mouth further into the standing water. As the deltaic lobe advances, the gradient of the river channel becomes lower because the river channel is longer but has the same change in elevation (see slope). As the slope of the river channel decreases, it becomes unstable for two reasons. First, water under the force of gravity will tend to flow in the most direct course down slope. If the river could breach its natural levees (i.e., during a flood), it would spill out onto a new course with a shorter route to the ocean, thereby obtaining a more stable steeper slope.[1] Second, as its slope gets lower, the amount of shear stress on the bed will decrease, which will result in deposition of sediment within the channel and for the channel bed to rise relative to the floodplain. This will make it easier for the river to breach its levees and cut a new channel that enters the body of standing water at a steeper slope. Oftentimes when the channel does this, some of its flow can remain in the abandoned channel. When these channel switching events happen repeatedly over time, a mature delta will gain a distributary network.
Another way in which these distributary networks may form is from the deposition of mouth bars (mid-channel sand and/or gravel bars at the mouth of a river). When this mid-channel bar is deposited at the mouth of a river, the flow is routed around it. This results in additional deposition on the upstream end of the mouth-bar, which splits the river into two distributary channels. A good example of the result of this process is the Wax lake delta in Louisiana.
In both of these cases, depositional processes force redistribution of deposition from areas of high deposition to areas of low deposition. This results in the smoothing of the planform (or map-view) shape of the delta as the channels move across its surface and deposit sediment. Because the sediment is laid down in this fashion, the shape of these deltas approximates a fan. It is closer to an ideal fan the more often the flow changes course because more rapid changes in channel position results in more uniform deposition of sediment on the delta front. The Mississippi and Ural River deltas, with their bird's-feet, are examples of rivers that do not avulse often enough to form a symmetrical fan shape. Alluvial fan deltas, as seen in their name, avulse frequently and more closely approximate an ideal fan shape.
[edit] Types of deltas
Deltas are typically classified according to the main control on deposition, which is usually either a river, waves, or tides.[2] These controls have a large effect on the shape of the resulting delta.
[edit] River-dominated deltas
River dominated deltas, such as the Mississippi delta, usually take on a multi-lobed shape that results from repeated sequences of channel occupation, offshore deposition, and channel avulsion. (See delta switching.) When a single channel is occupied for a long period of time, its deposits extend the channel far offshore, and causes the delta to resemble a bird's foot; the term "digitate delta" is sometimes used as well. These deltas are often characterized by a main channel that divides itself into several distributary channels.
Digitate deltas can be often seen on sediment-rich rivers flowing into lakes. Among the examples are the delta of the Ural River in Kazakhstan (),[3] the delta of Saskatchewan River at its fall into Cedar Lake in Manitoba,[4] or the silt jetties at the fall of the Mitchell River into Lake King (part of Australia's Gippsland Lakes).
Smaller formation of this type can be seen on rivers and irrigation channels depositing sediment into human-built reservoirs. One example is the sediment-formed peninsula at the point () where the Kuma-Manych Canal flows into the Chogray Reservoir in southern Russia. As these structures were completed in the late 1960s, the peninsula must be the product of just 40 years' worth of sedimentation.
[edit] Wave-dominated deltas
In wave dominated deltas, wave erosion controls the shape of the delta, although deposition still outweighs the amount of erosion and the delta is able to advance into the sea. Deltas of this form, such as the Nile delta, tend to have a characteristic Greek-capital-delta shape .
[edit] Tide-dominated deltas
Erosion is also an important control in tide dominated deltas, such as the Ganges delta, which may be mainly submarine, with prominent sand bars and ridges. This tends to produce a "dendritic" structure.[2] Tidal deltas behave differently from river- and wave-dominated deltas, which tend to have a few main distributaries. Once a wave- or river- distributary silts up, it is abandoned, and a new channel forms elsewhere. In a tidal delta, new distributaries are formed during times when there's a lot of water around - such as floods or storm surges. These distributaries slowly silt up at a pretty constant rate until they fizzle out.[2]
[edit] Gilbert deltas
A Gilbert delta (named after Grove Karl Gilbert) is a specific type of delta that is formed by coarse sediments, as opposed to gently-sloping muddy deltas such as that of the Mississippi. For example, a mountain river depositing sediment into a freshwater lake would form this kind of delta.[5] [6] While some authors describe both lacustrine and marine locations of Gilbert deltas[5], others note that their formation is more characteristic of the freshwater lakes, where it is easier for the river water to mix with the lakewater faster (as opposed to the case of a river falling into the sea or a salt lake, where less dense fresh water brought by the river stays on top longer).[7]
G.K. Gilbert himself first described this type of delta on Lake Bonneville in 1885.[7] Elsewhere, similar structures can be found e.g. at the mouths of several creeks flowing into Lake Okanagan in British Columbia and forming prominent peninsulas at Naramata (), Summerland (), or Peachland ()
[edit] Estuaries
Other rivers, particularly those located on coasts with significant tidal range, do not form a delta but enter into the sea in the form of an estuary. Notable examples include the Saint Lawrence River and the Tagus estuary.
[edit] Inland deltas
In rare cases the river delta is located inside a large valley and is called an inverted river delta. Sometimes a river will divide into multiple branches in an inland area, only to rejoin and continue to the sea; such an area is known as an inland delta, and often occur on former lake beds. The Niger Inland Delta is the most notable example. The Amazon has also an inland delta before the island of Marajo.
In some cases a river flowing into a flat arid area splits into channels which then disappear in the desert. Okavango Delta in Botswana is one well known example.
[edit] Sedimentary structure
The formation of a delta consists of three main forms: the topset, foreset/frontset, and bottomset.[5]
- The bottomset beds are created from the suspended sediment that settles out of the water as the river flows into the body of water and loses energy. The suspended load is carried out the furthest into the body of water than all other types of sediment creating a turbidite. These beds are laid down in horizontal layers and consist of smaller grains.
- The foreset beds in turn build over the bottomset beds as the main delta form advances. The foreset beds consist of the bed load that the river is moving along which consists of larger sediments that roll along the main channel. When it reaches the edge of the form, the bed load rolls over the edge, and builds up in steeply angled layers over the top of the bottomset beds. The angle of the outermost edge of the delta is created by the sediments angle of repose. As the forsets build outward (which make up the majority of the delta) they pile up and miniature landslides occur. This slope is created in this fashion as the bedload continues to be deposited and the delta moves outward. In cross section, one would see the foresets lying in angled, parallel bands, showing each stage of the creation of the delta.
- The topset beds in turn overlay the foresets, and are horizontal layers of smaller sediment size that form as the main channel of the river shifts elsewhere and the larger particles of the bed load no longer are deposited. As the channels move across the top of the delta, the suspended load settles out in horizontal beds over the top.
[edit] Deltas and alluvial fans
Deltas are differentiated from alluvial fans in that deltas have a shallow slope, contain fine-grained sediment (sand and mud), and always flow into a body of water. Alluvial fans, on the other hand, are steep, have coarse-grained sediments (including boulders), and are dominated by debris flows and large floods; these floods are often flash floods. They can either flow onto a land surface, or into a body of water; in the latter case, they are called alluvial fan deltas.
[edit] Examples of notable deltas
The most famous delta is that of the Nile River, and it is this delta from which the term is derived. Ganges/Brahmaputra combination (this delta spans most of Bangladesh and West Bengal) is the world's largest delta, and empties into the Bay of Bengal. Other rivers with notable deltas include the Niger River, the Tigris-Euphrates, the Rhine, the Rhône, the Danube, the Ebro, the Volga, the Lena, the Indus, the Krishna-Godavari, the Kaveri, the Ayeyarwady (Irrawaddy), the Mekong, the Sacramento-San Joaquin, the Mississippi, the Orinoco, the Amazon, and the Paraná.
[edit] Ecological threats to deltas
Human activities, including diversion of water and the creation of dams for hydroelectric power or to create reservoirs can radically alter delta ecosystems. Dams block sedimentation which can cause the delta to erode away. The use of water upstream can greatly increase salinity levels as less fresh water flows to meet the salty ocean water. While nearly all deltas have been impacted to some degree by humans, the Nile delta and Colorado River Delta are some of the most extreme examples of the ecological devastation caused to deltas by damming and diversion of water.
[edit] See also
- Delta switching
- Estuary
- Mega delta
- Alluvial fan
- Formation of delta-shaped river basin
- Avulsion (river)
[edit] References
 |
Wikimedia Commons has media related to: River deltas |
- ^ Slingerland, R. and N. D. Smith (1998), Necessary conditions for a meandering-river avulsion, Geology (Boulder), 26, 435-438.
- ^ a b c Fagherazzi, S (Dec 2008). "Self-organization of tidal deltas". Proceedings of the National Academy of Sciences of the United States of America 105 (48): 18692–5. doi:. ISSN 0027-8424. PMID 19033190.
- ^ Ural River Delta, Kazakhstan (NASA Earth Observatory)
- ^ Saskatchewan River Delta, Manitoba, Canada (NASA Earth Observatory)
- ^ a b c Characteristics of deltas. (Available archived at [1] - checked Dec 2008.)
- ^ Bernard Biju-Duval, J. Edwin Swezey. "Sedimentary Geology". Page 183. ISBN 2710808021. Editions TECHNIP, 2002. Partial text on Google Books.
- ^ a b "Geological and Petrophysical Characterization of the Ferron Sandstone for 3-D Simulation of a Fluvial-deltaic Reservoir". By Thomas C. Chidsey, Thomas C. Chidsey, Jr (ed), Utah Geological Survey, 2002. ISBN 1557916683. Page 2-17. Partial text on Google Books.
[edit] External links
- Louisiana State University Geology - World Deltas
